Omega Dishwasher Error i10

⚡ Quick Answer: The Omega Dishwasher error code i10 indicates a water inlet valve malfunction, preventing the dishwasher from filling with water. This issue may be du... ✅ DIY Fixable

What Does Error i10 Mean?

The Omega Dishwasher error code i10 indicates a water inlet valve malfunction, preventing the dishwasher from filling with water. This issue may be due to low water pressure, a closed water tap, a clogged inlet filter, or a kinked inlet hose. To troubleshoot, check that the water tap is fully open, ensure the inlet hose is not kinked or bent, and inspect the inlet filter for any clogs.

Common Symptoms:

  • Dishwasher displays error code i10

Possible Causes

  • Water Inlet Valve
  • Faulty Wiring
  • Water Supply Issues

How to Fix Error i10

DIY Fix Check water supply basics

  1. Ensure the water tap supplying the dishwasher is fully open.
  2. Check that the inlet hose is not kinked, twisted, or bent.
  3. Inspect the inlet filter (if accessible) and clean if clogged.

Technician Only Technician-level inspection of water supply components

  1. Disconnect dishwasher and inspect inlet hose and filter thoroughly.
  2. Verify water pressure and correct installation of inlet connections.
  3. Test water valve and pressure sensor to confirm proper operation.

Parts needed: Inlet hose, Water inlet valve, Inlet filter

🛑 When to Call a Pro:
  • If water supply checks (tap, hose, filter) do not resolve the error.
  • If the inlet valve or pressure sensor is suspected to be faulty.

Next step

Choose the next step for i10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Water Inlet Valve
resistance 500-1500 ohms
part_number Omega 123456
voltage_rating 120V AC

Common Questions

What does i10 error mean on Omega Dishwasher?

The i10 error indicates a malfunction in the water inlet valve, preventing the dishwasher from filling.

Can I fix Omega Dishwasher i10 error myself?

Yes, check the water tap, ensure the inlet hose is straight, and clean the inlet filter if accessible.

How much does it cost to fix i10 error?

Repair costs range from ¥5,000 to ¥20,000+, depending on parts and labor.

When should I call a technician for i10?

Call a technician if your checks do not resolve the error or if you suspect a faulty inlet valve or pressure sensor.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!