Omega Dishwasher Error E14

⚡ Quick Answer: The Omega Dishwasher error E14 indicates a malfunction related to water flow or drainage, often resulting in the dishwasher halting operation and disp... ✅ DIY Fixable

What Does Error E14 Mean?

The Omega Dishwasher error E14 indicates a malfunction related to water flow or drainage, often resulting in the dishwasher halting operation and displaying this error code. Symptoms may include unusual noises, irregular water levels, or issues with filling and draining. To address this, ensure the water supply is open, the inlet hose is not kinked, and that filters are clean. Power cycling the dishwasher may also help resolve the issue.

Common Symptoms:

  • Dishwasher displays E14 and stops running
  • Possible water level irregularities (in other brands)
  • Filling or drainage issues (based on generic sources)

Possible Causes

  • Drain Pump
  • Wiring Issues
  • Control Board Failure

How to Fix Error E14

DIY Fix Basic Checks

  1. Ensure water supply to the dishwasher is fully open and the inlet hose is not kinked.
  2. Check that the dishwasher’s filter and inlet screens are clean.
  3. Power cycle the dishwasher (turn off, wait, turn on) to see if the error clears.

Technician Only Professional Inspection

  1. Inspect and test water inlet valve, pressure/flow sensors, and related wiring.
  2. Check for blockages in inlet and drain systems.
  3. Use service tools to read diagnostic data and confirm the specific fault.

Parts needed: Water inlet valve, Flow/pressure sensor, Hoses and connectors

🛑 When to Call a Pro:
  • If basic checks don’t clear the error
  • If water leakage, flooding, or unusual noises occur
  • If you are uncertain about internal inspections

Next step

Choose the next step for E14

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E14 error mean on Omega Dishwasher?

E14 indicates a malfunction related to water flow or drainage, stopping the dishwasher's operation.

Can I fix Omega Dishwasher E14 error myself?

Yes, you can perform basic checks like ensuring the water supply is open and hoses are clear.

How much does it cost to fix E14 error?

Repair costs can vary by region and issue, typically ranging from $100 to $300+ for parts and labor.

When should I call a technician for E14?

Call a technician if basic checks don't resolve the error, or if you notice water leakage or unusual noises.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!