Nordmende Dishwasher Error DRAIN-FAILURE
⚡ Quick Answer: The Nordmende dishwasher DRAIN-FAILURE error indicates a drainage issue where the appliance cannot discharge water effectively. Symptoms include water... ✅ DIY Fixable
What Does Error DRAIN-FAILURE Mean?
The Nordmende dishwasher DRAIN-FAILURE error indicates a drainage issue where the appliance cannot discharge water effectively. Symptoms include water remaining in the dishwasher after a cycle, stopping mid-cycle, or failing to advance. Common causes are a clogged drain pump, filters, or drain hose, as well as potential faults with the drain pump itself.
Common Symptoms:
- Water remains in the dishwasher at the end of a cycle
- Dishwasher stops mid‑cycle due to inability to drain
- May trigger error indicators or fail to advance through cycle
Possible Causes
- Clogged drain pump, filter, or drain hose (medium)
- Faulty drain pump or drain components (medium)
How to Fix Error DRAIN-FAILURE
DIY Fix Check and clean filters and drain hose
- Turn off and unplug the dishwasher.
- Remove the bottom rack to access the filter.
- Take out and thoroughly clean the coarse and fine filters.
- Inspect the drain hose for kinks, blockages or debris and clear them.
Technician Only Inspect and service drain pump and pump assembly
- Disconnect the dishwasher from power and water supply.
- Remove access panels to reach the drain pump.
- Check the drain pump impeller for damage or blockage.
- Test the drain pump operation with appropriate tools (multimeter).
- Replace the drain pump or associated valves if defective.
Parts needed: Drain pump, Drain hose, Pump impeller
- If the dishwasher continues to show drain failure after cleaning filters and hoses.
- If the drain pump makes unusual noises or fails electrical tests.
- If water spills during attempted drainage.
Next step
Choose the next step for DRAIN-FAILURE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does DRAIN-FAILURE error mean on Nordmende dishwasher?
It indicates a drainage issue, often resulting in water left in the dishwasher after cycles.
Can I fix Nordmende dishwasher DRAIN-FAILURE error myself?
Yes, you can check and clean filters and the drain hose to resolve the issue.
How much does it cost to fix DRAIN-FAILURE error?
The estimated repair cost ranges from €80 to €250, depending on parts and labor.
When should I call a technician for DRAIN-FAILURE?
Call if the error persists after cleaning, if the drain pump makes unusual noises, or if water spills during drainage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!