Neff Oven Error E115
⚡ Quick Answer: The Neff Oven error E115 signifies an overtemperature condition, where the oven has detected excessive internal heat and halted operation for safety. ... ✅ DIY Fixable
What Does Error E115 Mean?
The Neff Oven error E115 signifies an overtemperature condition, where the oven has detected excessive internal heat and halted operation for safety. This error can occur during high-temperature settings, like long baking or self-cleaning cycles, and may result in an unresponsive display. Symptoms include the oven stopping mid-cycle and requiring a cool-down period before reuse. Possible causes include overheating in the oven cavity, or faults in the temperature sensor or associated circuitry.
Common Symptoms:
- Oven stops heating mid‑cycle
- Error appears during or after high‑temperature use
- Oven displays safety shut‑off and may require cool‑down before reuse
- Intermittent appearance without a clear user action
Possible Causes
- Overtemperature detected in the oven cavity (medium)
- Faulty oven temperature sensor or related sensing circuitry (medium)
How to Fix Error E115
DIY Fix Initial user checks and cooling
- Turn oven off and allow it to fully cool down.
- Ensure the oven vents/airflow are not blocked and the oven is not overloaded.
- After cool‑down, restart the oven and monitor if the error recurs.
Technician Only Inspect and test temperature sensor and cooling components
- Disconnect oven from power.
- Test the oven temperature sensor resistance and wiring according to factory specifications.
- Inspect cooling fan operation and airflow pathways.
- Replace the temperature sensor if readings are out of specification.
- If sensor tests normal but fault persists, inspect the control electronics for thermal or sensor interface faults.
Parts needed: Temperature sensor (NTC), Cooling fan assembly (if relevant), Internal wiring harness, Control board (if sensor and fan are ruled out)
- Error persists after cool‑down and basic checks
- Frequent recurrence of E115 with normal oven use
- Evidence of component overheating or smoke
Next step
Choose the next step for E115
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Cooling Fan Motor
Moves cooling air around hot cooking components and electronic controls.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2500W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | NEFF 00182246 |
| voltage_rating | 230V AC |
Common Questions
What does E115 error mean on Neff Oven?
E115 indicates an overtemperature condition that causes the oven to stop functioning for safety.
Can I fix Neff Oven E115 error myself?
Yes, you can turn off the oven, allow it to cool, and check for airflow blockages before restarting.
How much does it cost to fix E115 error?
Repair costs range from $80 to $250, depending on parts and labor in your region.
When should I call a technician for E115?
Call a technician if the error persists after cool-down or if you notice signs of overheating or smoke.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!