Neff Dishwasher Error h02
⚡ Quick Answer: The h02 error code on your Neff Dishwasher indicates a delayed start setting rather than a malfunction. When this code appears, the dishwasher is set ... ✅ DIY Fixable
What Does Error h02 Mean?
The h02 error code on your Neff Dishwasher indicates a delayed start setting rather than a malfunction. When this code appears, the dishwasher is set to wait for 2 hours before starting the wash cycle. If the display shows 'h02', it means the timer is engaged and the appliance will begin its operation once the delay period is over. You can either wait for the set time to elapse or adjust the settings to start immediately.
Common Symptoms:
- Dishwasher does not start immediately and displays "h02" on the panel
- Display shows an "h" followed by a number instead of traditional error codes
Possible Causes
- Delay start/timer setting engaged (medium)
How to Fix Error h02
DIY Fix Clear or adjust the delay start setting
- Locate the delay start button or controls on your dishwasher’s user interface.
- Press the delay start button until the display shows h00 (no delay).
- Start the wash cycle normally.
DIY Fix Wait out the programmed delay
- If the delay start was intentionally set for 2 hours (h02), wait until the delay time completes.
- The dishwasher should automatically begin the wash cycle when the delay expires.
- If the dishwasher still does not start after clearing the delay start (h00) and there are other error indicators, contact Neff service for diagnosis.
Next step
Choose the next step for h02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | 11004567 |
| voltage_rating | 230V AC |
Common Questions
What does h02 error mean on Neff Dishwasher?
The h02 error indicates a 2-hour delay start setting, not a fault.
Can I fix Neff Dishwasher h02 error myself?
Yes, you can clear the delay by adjusting the settings or wait for the timer to expire.
How much does it cost to fix h02 error?
The estimated repair cost varies by model and region.
When should I call a technician for h02?
Call a technician if the dishwasher does not start after clearing the delay or shows other error indicators.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!