Neff Dishwasher Error E08
⚡ Quick Answer: The Neff Dishwasher error E08 indicates a low water level or poor water circulation within the tub, which can lead to inadequate wash performance and ... ✅ DIY Fixable
What Does Error E08 Mean?
The Neff Dishwasher error E08 indicates a low water level or poor water circulation within the tub, which can lead to inadequate wash performance and leftover dirty dishes. You may notice unusual sounds during operation and water remaining at the bottom of the tub. This issue often stems from problems with the water inlet valve, incorrect drain hose installation, or a blockage in the water inlet system.
Common Symptoms:
- Dishwasher displays error E08 during or after cycle
- Poor wash performance or dishes still dirty
- Rest water remains in the bottom of the tub
- Dishwasher may finish cycle but water level appears low
Possible Causes
- Low water level in dishwasher tub / insufficient water fill (medium)
- Incorrect installation of drain hose causing siphoning (medium)
- Weak or blocked water inlet (valve/filter) (medium)
How to Fix Error E08
DIY Fix Check water supply and basic installation
- Ensure the water supply tap to the dishwasher is fully open.
- Verify the water inlet hose is not kinked or blocked.
- Check that the drain hose is installed at the correct height to prevent siphoning.
- Clean the inlet hose filter screen at the Aquastop or connector.
Technician Only Inspect internal water circuits and replace faulty parts
- Access the dishwasher base and inspect the water inlet valve for proper operation and pressure.
- Check the circulation pump for obstructions or impeller damage affecting water distribution.
- Verify that the drain hose installation conforms to specifications and there’s no internal siphoning.
- Test water level sensors and related control circuits if basic causes are eliminated.
Parts needed: Water inlet valve, Inlet hose and filter, Circulation pump, Drain hose
- If water supply and basic installation checks do not resolve the issue
- If circulation pump shows signs of electrical malfunction
- If there’s uncertainty in safely accessing internal components
Next step
Choose the next step for E08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 5-15 ohms |
| part_number | Neff 174001000 |
| voltage_rating | 230V AC |
Common Questions
What does E08 error mean on Neff Dishwasher?
E08 error means low water levels or poor circulation, leading to dirty dishes and water remaining in the tub.
Can I fix Neff Dishwasher E08 error myself?
Yes, you can check the water supply, ensure hoses are not kinked, and verify the drain hose installation.
How much does it cost to fix E08 error?
Estimated repair costs range from ¥10,000 to ¥50,000+, depending on parts and service rates.
When should I call a technician for E08?
Call a technician if basic checks don’t resolve the issue or if internal components need inspection.
Sources & References
- Neff Geschirrspüler Fehler E08 discussion (community)
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!