Neff Dishwasher Error E07

⚡ Quick Answer: The Neff Dishwasher E07 error indicates a malfunction in the drying or ventilation system, commonly caused by a faulty drying fan motor or a blocked v... ✅ DIY Fixable

What Does Error E07 Mean?

The Neff Dishwasher E07 error indicates a malfunction in the drying or ventilation system, commonly caused by a faulty drying fan motor or a blocked ventilation flap. Users may notice that the dishwasher stops mid-cycle, experiences poor drying performance, or shows residual water near the heat exchanger. To address this, check for blockages and reset the appliance. Persistent issues may require professional inspection and repair of the drying fan and associated components.

Common Symptoms:

  • Dishwasher stops mid‑cycle with E07 displayed
  • Poor or no drying performance after wash cycle
  • Possible residual water near heat exchanger area

Possible Causes

  • Drying fan motor fault (medium)
  • Blocked or stuck ventilation/flap system (medium)
  • Water intrusion into drying/ventilation channels or Zeolith system disruption (medium)

How to Fix Error E07

DIY Fix Check for obvious blockages and reset

  1. Turn off and disconnect the dishwasher from mains power.
  2. Inspect the vent outlet and drying-related inlets for debris or obstructions.
  3. Remove visible lint, plastic film, or utensils blocking airflow.
  4. Reconnect the dishwasher and run a short cycle to see if the error clears.

Technician Only Inspect and replace drying fan assembly or related components

  1. Disconnect power and access the drying fan and ventilation assembly per service manual guidance.
  2. Test the drying fan motor for electrical continuity and free rotation.
  3. Inspect wiring harness to the fan and ventilation flap for damage or loose connections.
  4. Replace the drying fan motor, ventilation flap, or Zeolith system parts if defective.

Parts needed: Drying fan motor, Ventilation flap/duct assembly, Zeolith drying system components (if applicable)

🛑 When to Call a Pro:
  • If the error persists after checking for blockages and basic user‑level actions
  • If internal components like the drying fan or Zeolith system need inspection or replacement

Next step

Choose the next step for E07

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number NEFF 174001
voltage_rating 230V AC

Common Questions

What does E07 error mean on Neff Dishwasher?

E07 indicates a problem with the drying or ventilation system, often linked to the drying fan motor or blocked ventilation.

Can I fix Neff Dishwasher E07 error myself?

Yes, you can check for blockages and reset the appliance to resolve the error.

How much does it cost to fix E07 error?

Repair costs for the E07 error range from €80 to €250, depending on parts and labor.

When should I call a technician for E07?

Call a technician if the error persists after basic checks or if internal components need inspection.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!