Monogram Washer Dryer Error 18
⚡ Quick Answer: The Monogram washer dryer error 18 indicates a fault in the drying system, often linked to overheating or temperature regulation issues. Common sympto... ✅ DIY Fixable
What Does Error 18 Mean?
The Monogram washer dryer error 18 indicates a fault in the drying system, often linked to overheating or temperature regulation issues. Common symptoms include premature cycle stoppage, failure to heat properly, and overheating during drying cycles. This error is typically caused by blocked airflow, restricted ventilation, or malfunctioning components like the dryer thermistor or high-limit thermostat.
Common Symptoms:
- Dryer cycle stops prematurely
- Unit may show error during drying heating cycles
- Dryer may overheat or fail to heat properly
Possible Causes
- Blocked airflow / restricted ventilation leading to overheat conditions (medium)
- Failed dryer thermistor or high‑limit thermostat triggering overheat fault (medium)
How to Fix Error 18
DIY Fix Basic airflow and lint management
- Unplug the appliance and allow it to cool completely.
- Clean the lint filter thoroughly.
- Check and clear external venting and ductwork for lint or obstructions.
- Ensure the appliance has proper clearance and ventilation space around it.
Technician Only Test and replace temperature regulation components
- Disconnect power and access the dryer’s internal components.
- Test the dryer thermistor and high‑limit thermostat for continuity and compare to OEM specifications.
- Inspect wiring and connectors for damage or signs of overheating.
- Replace any failed thermistors or thermostats with correct OEM parts.
- Reassemble and test a drying cycle monitoring temperature behavior.
Parts needed: Dryer thermistor, High‑limit thermostat
- If error persists after cleaning airflow paths and replacing basic thermal sensors.
- If there are signs of electrical burning, smoke, or repeated overheating.
Next step
Choose the next step for 18
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | WD21X10463 |
| voltage_rating | 120V AC |
Common Questions
What does 18 error mean on Monogram washer dryer?
Error 18 indicates a drying system fault, often related to overheating or temperature regulation.
Can I fix Monogram washer dryer 18 error myself?
Yes, you can clean the lint filter and check external venting for obstructions.
How much does it cost to fix 18 error?
Estimated repair costs range from $80 to $250, including parts and labor.
When should I call a technician for 18?
Call a technician if the error persists after basic cleaning or if you notice signs of electrical burning.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!