Monogram Oven Error F5

⚡ Quick Answer: The F5 error code on your Monogram oven indicates a malfunction within the temperature sensor or an issue with the relay drive circuit. This can lead ... ✅ DIY Fixable

What Does Error F5 Mean?

The F5 error code on your Monogram oven indicates a malfunction within the temperature sensor or an issue with the relay drive circuit. This can lead to erratic temperature readings, failure to heat, or the oven not completing its cycles. Ensure the oven door closes properly, as door-related faults may also trigger this error.

Common Symptoms:

  • Oven displays F5 and may not operate normally
  • Oven may shut off or refuse to start when F5 appears
  • Door-related faults reported by some community sources

Possible Causes

  • Loss of relay drive circuit controlling oven functions (medium)
  • Faulty or misaligned door safety switch (low)

How to Fix Error F5

DIY Fix Basic checks before calling service

  1. Power-cycle the oven by shutting off at breaker for 60 seconds and restoring power.
  2. Open and close the oven door to ensure it latches fully and makes firm contact.
  3. Observe if the F5 code returns after a reset.

Technician Only Diagnose and repair relay drive and door switch circuitry

  1. Disconnect power to the oven before servicing.
  2. Measure and inspect the relay drive circuit for continuity and correct operation using a multimeter.
  3. Check the oven’s relay components for signs of damage (burnt, melted, or open contacts).
  4. Test the door safety switch alignment and functionality; replace if it fails continuity tests.
  5. If relay drive circuit and door switch are good, inspect and test the main control board for fault signals and replace the board if necessary.

Parts needed: Door safety switch, Relay or relay drive components, Control board

🛑 When to Call a Pro:
  • If F5 persists after basic user-level checks and resets
  • If internal wiring, relay drive circuit, or control board diagnostics are needed

Next step

Choose the next step for F5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply
Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number WB21X5301
voltage_rating 120V AC

Common Questions

What does F5 error mean on Monogram oven?

F5 indicates a temperature sensor malfunction or relay drive circuit issue, causing erratic heating.

Can I fix Monogram oven F5 error myself?

You can try power-cycling the oven and ensuring the door latches properly before seeking professional help.

How much does it cost to fix F5 error?

Repair costs vary; door switch replacement typically ranges from $30–$100, while relay or board replacement can be $150–$500.

When should I call a technician for F5?

Call a technician if the F5 error persists after resets and basic checks, or if internal diagnostics are needed.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318