Monogram Oven Error F2

⚡ Quick Answer: The Monogram oven F2 error indicates a malfunction related to the temperature sensor, resulting in erratic readings or the oven overheating. This erro... ✅ DIY Fixable

What Does Error F2 Mean?

The Monogram oven F2 error indicates a malfunction related to the temperature sensor, resulting in erratic readings or the oven overheating. This error occurs when the oven detects temperatures outside of safe parameters, triggering a shutdown to protect itself. Common causes include a faulty temperature sensor, blocked ventilation, or issues with the control board. If you see the F2 code, the oven may shut off automatically or beep during bake or broil cycles.

Common Symptoms:

  • Oven displays F2 code on control panel during bake or broil cycles.
  • Oven shuts off automatically after heating or overheats.
  • Beeping accompanying the error.

Possible Causes

  • Faulty oven temperature sensor/thermostat (medium)
  • Blocked ventilation or poor airflow causing overheating (medium)
  • Control board/bake or broil relay malfunction (medium)

How to Fix Error F2

DIY Fix Basic checks and power reset

  1. Turn the oven off and disconnect power at the breaker or unplug.
  2. Allow the oven to fully cool.
  3. Restore power and attempt a new cycle to see if F2 returns.

Technician Only Test and replace temperature sensor

  1. Disconnect power and access the oven’s rear or interior back panel.
  2. Measure the resistance of the temperature sensor with a multimeter; compare to model specs.
  3. Replace the sensor if resistance is out of range or open/shorted.

Parts needed: oven temperature sensor

Technician Only Inspect and fix airflow/ventilation

  1. Ensure oven vents and surrounding cabinetry meet manufacturer spacing requirements.
  2. Clean any debris blocking airflow.
  3. Verify proper fan operation if present.

Parts needed: none unless fan replacement needed

Technician Only Control board and relay inspection

  1. Check the control board for welded/burned relays or visible damage.
  2. Replace the control board if relays are stuck or malfunctioning.

Parts needed: control board/EOC

🛑 When to Call a Pro:
  • If basic resets do not clear the error.
  • If temperature sensor testing is inconclusive or if control board damage is suspected.
  • If you are not comfortable performing electrical diagnostics.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10,000 ohms at 25°C
part_number WB21X5301
voltage_rating 120V AC

Common Questions

What does F2 error mean on Monogram oven?

F2 indicates a temperature sensor malfunction, causing erratic readings or shutdown.

Can I fix Monogram oven F2 error myself?

Yes, you can perform basic checks and power resets to troubleshoot the issue.

How much does it cost to fix F2 error?

Estimated repair cost for F2 error is medium, typically the cost of the sensor part plus labor.

When should I call a technician for F2?

Call a technician if resets don’t clear the error or if you're uncomfortable with diagnostics.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!