Mitsubishi Refrigerator Error E8

⚡ Quick Answer: The Mitsubishi Refrigerator E8 error code typically indicates a compressor overload protection issue. Users may notice unusual clicking sounds and the... ✅ DIY Fixable

What Does Error E8 Mean?

The Mitsubishi Refrigerator E8 error code typically indicates a compressor overload protection issue. Users may notice unusual clicking sounds and the display flashing intermittently. This problem often arises due to insufficient ventilation or potential electrical issues. To address the E8 error, users should first ensure the refrigerator is properly plugged in and check for any obstructions that may be hindering airflow around the unit. A basic reset by unplugging the refrigerator for 5-10 minutes may also help resolve the issue.

Possible Causes

  • Compressor Overload Relay
  • Faulty Compressor
  • Dirty Condenser Coils

How to Fix Error E8

DIY Fix General basic checks and reset

  1. Check that the refrigerator is powered and the plug is fully inserted.
  2. Inspect for obvious issues such as poor ventilation around the unit.
  3. Try a basic reset: unplug the refrigerator from power for 5–10 minutes, then plug it back in to see if the error clears.
🛑 When to Call a Pro:
  • If the E8 code persists after power cycling and basic checks, stop using the refrigerator and contact Mitsubishi Electric service for diagnosis.

Next step

Choose the next step for E8

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Compressor

Compresses refrigerant within the sealed cooling system and requires specialized service equipment.

Typical part-only price
$180 - $600
DIY difficulty
Hard
Estimated time
120-240 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 150W
component Compressor Overload Relay
resistance 5-10 ohms
part_number Mitsubishi 220V-240V Relay
voltage_rating 220V AC

Common Questions

What does E8 error mean on Mitsubishi Refrigerator?

The E8 error indicates a compressor overload protection issue, often with clicking sounds and a flashing display.

Can I fix Mitsubishi Refrigerator E8 error myself?

Yes, you can perform basic checks like ensuring proper power connection and ventilation, and try a reset.

How much does it cost to fix E8 error?

Repair costs vary by model and region; consult a technician for a specific estimate.

When should I call a technician for E8?

If the E8 code persists after basic troubleshooting, contact Mitsubishi Electric service for further diagnosis.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!