Mitsubishi Refrigerator Error E10

⚡ Quick Answer: The Mitsubishi Refrigerator error E10 indicates a malfunction in the temperature sensing circuit, often due to a faulty thermistor. This can cause ina... ✅ DIY Fixable

What Does Error E10 Mean?

The Mitsubishi Refrigerator error E10 indicates a malfunction in the temperature sensing circuit, often due to a faulty thermistor. This can cause inaccurate temperature control, leading to inadequate cooling in one or more compartments. Users may notice unusual noises or persistent cooling issues alongside the error code displayed on the control panel.

Common Symptoms:

  • Error code E10 displayed on control panel
  • Inaccurate temperature control
  • Possible loss of proper cooling performance in one or more compartments

Possible Causes

  • Thermistor (temperature sensor) open or short circuit (medium)

How to Fix Error E10

DIY Fix Check basic connections and reset

  1. Turn off and unplug the refrigerator from power.
  2. Wait 5–10 minutes, then plug it back in to see if the error clears (power cycle reset).
  3. Ensure the refrigerator is level and doors are fully closed.

Technician Only Inspect and replace thermistor or related wiring

  1. Access the temperature sensor (thermistor) and associated connectors near the ice tray or affected compartment.
  2. Check harness connectors and pins for loose or corroded connections.
  3. Measure thermistor resistance; if open or shorted, replace the thermistor.
  4. Verify proper operation after replacement and clear stored error codes.

Parts needed: Temperature sensor (thermistor), Wiring harness connectors

🛑 When to Call a Pro:
  • If E10 persists after basic resets and the refrigerator exhibits persistent cooling issues or fluctuating temperatures
  • If you are uncomfortable working with internal wiring or sensor components

Next step

Choose the next step for E10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E10 error mean on Mitsubishi Refrigerator?

E10 indicates a thermistor malfunction, causing inaccurate temperature control and cooling issues.

Can I fix Mitsubishi Refrigerator E10 error myself?

Yes, you can try basic resets by unplugging the refrigerator and checking connections.

How much does it cost to fix E10 error?

Repair costs range from ¥5,000 to ¥20,000, depending on parts and labor.

When should I call a technician for E10?

Call a technician if the E10 error persists after resets or if you're uncomfortable with internal repairs.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!