Miele Oven Error F44

⚡ Quick Answer: The Miele Oven F44 error indicates a malfunction in the heating element, often accompanied by an unusual buzzing sound and a failure to heat properly.... ✅ DIY Fixable

What Does Error F44 Mean?

The Miele Oven F44 error indicates a malfunction in the heating element, often accompanied by an unusual buzzing sound and a failure to heat properly. This error can cause the oven to stop normal operation entirely, suggesting an internal technical fault within the control electronics or wiring.

Common Symptoms:

  • Error F44 displayed on oven screen indicating a fault condition
  • Oven may stop normal operation when error is present

Possible Causes

  • Unspecified internal technical fault (official) (high)
  • Possible sensor/connection issue (low)

How to Fix Error F44

DIY Fix Basic reset procedure

  1. Turn off the oven and disconnect it from the power supply (unplug or switch off at circuit breaker).
  2. Wait at least 20–30 seconds.
  3. Restore power and turn the oven back on to see if the F44 code clears.

Technician Only Professional diagnosis and internal inspection

  1. If the error persists after power reset, schedule service with Miele or a qualified appliance technician.
  2. Technician should perform diagnostic tests using factory tools to pinpoint internal faults within control electronics or sensors.
  3. Repair or replace any identified faulty components per manufacturer guidance.

Parts needed: Control electronics/modules, Temperature sensors (if determined relevant), Internal wiring/connectors

🛑 When to Call a Pro:
  • If F44 persists after reset attempts
  • If the oven exhibits erratic behavior beyond simple display errors
  • If you are not comfortable with electrical disconnection or inspection

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number Miele 10125000
voltage_rating 240V AC

Common Questions

What does F44 error mean on Miele Oven?

The F44 error indicates a malfunction in the heating element, causing heating failure and unusual buzzing sounds.

Can I fix Miele Oven F44 error myself?

Yes, try a basic reset by disconnecting the power for 20-30 seconds and then restoring it.

How much does it cost to fix F44 error?

Repair costs vary by region and part, typically reflecting oven control board and service call expenses.

When should I call a technician for F44?

Call a technician if the F44 error persists after resets or if the oven shows erratic behavior.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!