Miele Oven Error F10

⚡ Quick Answer: The Miele oven F10 error indicates a water inlet issue, specifically that the steam generation system cannot detect a sufficient water level. This may... ✅ DIY Fixable

What Does Error F10 Mean?

The Miele oven F10 error indicates a water inlet issue, specifically that the steam generation system cannot detect a sufficient water level. This may be due to low water conductivity, improper water tank placement, or a malfunctioning water feed pump. Users may notice the F10 code when attempting to use the steam function, which fails to start. Addressing this issue involves checking the water quality, ensuring proper tank setup, and resetting the power to the oven.

Common Symptoms:

  • F10 displayed when attempting to use steam function
  • Steam function does not start
  • Water fill or water detection related issues

Possible Causes

  • Water level not detected due to low conductivity or water quality issues (high)
  • Improper water tank or suction hose placement / blockage (high)
  • Water feed pump dry or malfunction / internal water intake failure (medium)

How to Fix Error F10

DIY Fix Check water quality and tank setup

  1. Ensure the water tank is filled with fresh water.
  2. Make sure water conductivity is sufficient (if using softened/filtered water, consider adding a pinch of salt as per Miele guidelines).
  3. Confirm that the black suction hose inside the tank is correctly inserted vertically and not blocked.

DIY Fix Reset power and retry

  1. Turn off power to the oven at the circuit breaker or unplug the appliance.
  2. Wait ~5–10 minutes to fully power down.
  3. Restore power and retry the steam function to see if F10 clears.

Technician Only Inspect internal water pump and water detection components

  1. Remove the water tank and inspect internal water feed pump and connections.
  2. Test the operation of the feed pump and water level detection sensor.
  3. Replace any faulty internal components such as the pump, sensor, or suction hose assembly.

Parts needed: Water feed pump, Water level detection electrode/sensor, Suction hose assembly

🛑 When to Call a Pro:
  • If F10 persists after checking water tank, hose, and resetting power
  • If internal pump or water detection components appear faulty
  • If you are not comfortable performing checks inside the appliance

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number Miele 11020430
voltage_rating 240V AC

Common Questions

What does F10 error mean on Miele oven?

F10 indicates a water inlet issue where the steam function cannot detect sufficient water level.

Can I fix Miele oven F10 error myself?

Yes, check the water quality, ensure proper tank placement, and reset the power.

How much does it cost to fix F10 error?

Repair costs vary by component and region; a professional diagnostic is recommended.

When should I call a technician for F10?

Call if F10 persists after checking the tank and hose, or if internal components seem faulty.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!