Miele Microwave Error F267

⚡ Quick Answer: The Miele Microwave error code F267 indicates a malfunction related to the temperature limiter or temperature sensor circuitry. This error often manif... ✅ DIY Fixable

What Does Error F267 Mean?

The Miele Microwave error code F267 indicates a malfunction related to the temperature limiter or temperature sensor circuitry. This error often manifests as the microwave failing to heat food and may be accompanied by unusual buzzing sounds. If the F267 error persists, it signals a technical fault requiring professional attention.

Common Symptoms:

  • F267 appears on display regardless of mode
  • Microwave may not heat or may stop operation
  • Technical malfunction indicated

Possible Causes

  • Faulty temperature limiter / temperature sensor circuitry (high)

How to Fix Error F267

DIY Fix Basic check and restart

  1. Turn off the appliance at the mains or unplug it
  2. Wait 5–10 minutes to allow internal circuitry to reset
  3. Reconnect power and attempt a restart

Technician Only Technician diagnostic and repair

  1. Perform a full diagnostic of temperature limiter and related sensors
  2. Check wiring harness and connectors for the temperature limiter
  3. Replace defective temperature limiter or sensor assembly as needed
  4. Verify calibration and proper temperature control before returning to service

Parts needed: Temperature limiter / thermostat / thermal cutoff, Related temperature sensor wiring

🛑 When to Call a Pro:
  • If the error code persists after basic power reset
  • If the microwave fails to heat or behaves unpredictably
  • If any burning smell or smoke occurs

Technical Specifications

wattage 900W
component Magnetron
resistance 0.5-1.5 ohms
part_number Miele 11000000
voltage_rating 230V AC

Common Questions

What does F267 error mean on Miele Microwave?

F267 indicates a fault in the temperature limiter or sensor, causing heating failure.

Can I fix Miele Microwave F267 error myself?

Yes, try resetting the microwave by turning it off for 5-10 minutes.

How much does it cost to fix F267 error?

Repair costs vary by region but typically include a diagnostic fee plus parts and labor.

When should I call a technician for F267?

Call a technician if the error persists after a reset or if there's unusual behavior or smells.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!