Miele Dishwasher Error F67
⚡ Quick Answer: The Miele Dishwasher F67 error signals a malfunction in the circulation pump, which may result in low speed or failure to operate properly. This can l... ✅ DIY Fixable
What Does Error F67 Mean?
The Miele Dishwasher F67 error signals a malfunction in the circulation pump, which may result in low speed or failure to operate properly. This can lead to the dishwasher stopping mid-cycle, ineffective cleaning, and unusual pump noises. Addressing this issue typically involves inspecting the circulation pump assembly for blockages or damage.
Common Symptoms:
- Dishwasher stops mid‑cycle with F67 displayed
- Possible poor water circulation leading to ineffective cleaning
- Unusual pump noise or no water flow during wash
Possible Causes
- Circulation pump malfunction (high)
- Circulation pump speed too low (mechanical/electrical issue) (medium)
How to Fix Error F67
DIY Fix Basic checks before contacting service
- Turn dishwasher off, wait 5 minutes, then restart to see if code reappears.
- Ensure filters and sump area are clean to avoid debris restricting pump.
- Check for obvious blockages in spray arms or water distribution paths that could make pump work harder.
Technician Only Inspect and repair circulation pump assembly
- Disconnect power and water supply.
- Access the circulation pump and inspect for blockage, impeller damage, or motor failure.
- Measure pump motor current and speed; replace pump assembly if motor is faulty.
- Check associated wiring and control signals from main control board.
- Verify any heat pressure or speed sensors linked with pump operation.
Parts needed: Circulation pump assembly, Pump impeller, Electrical connectors
- If F67 persists after basic cleaning and restart
- If unusual noises or leaks are present
- If you are not experienced with internal appliance repair
Next step
Choose the next step for F67
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 40W |
|---|---|
| component | Drain Pump Assembly |
| resistance | 10-15 ohms |
| part_number | Miele 6110210 |
| voltage_rating | 120V AC |
Common Questions
What does F67 error mean on Miele Dishwasher?
F67 indicates a circulation pump malfunction, leading to poor water flow and ineffective cleaning.
Can I fix Miele Dishwasher F67 error myself?
Yes, check for blockages in filters, spray arms, and perform a reset by turning the dishwasher off for 5 minutes.
How much does it cost to fix F67 error?
Repair costs range from $150 to $400, depending on parts and labor in your region.
When should I call a technician for F67?
Call a technician if the error persists after basic troubleshooting or if you hear unusual noises or see leaks.
Sources & References
- Miele Dishwasher Fault F67 (official)
- Miele Dishwasher Fault F67 (Hong Kong) (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!