Miele Dishwasher Error F601
⚡ Quick Answer: The Miele dishwasher error F601 indicates a malfunction in the AutoDos system, specifically related to the automatic detergent dosing mechanism. Users... ✅ DIY Fixable
What Does Error F601 Mean?
The Miele dishwasher error F601 indicates a malfunction in the AutoDos system, specifically related to the automatic detergent dosing mechanism. Users may notice the error code displayed during wash cycles, with the AutoDos function failing to dispense detergent properly. Common causes include misalignment of the AutoDos PowerDisk, blockages in the detergent delivery system, or an internal fault in the AutoDos electronics. Users can manually dispense detergent as a temporary solution while troubleshooting the issue.
Common Symptoms:
- Display shows F601 during a wash cycle
- AutoDos function fails to operate or stops mid‑cycle
- Dishwasher otherwise runs but detergent not dispensed automatically
Possible Causes
- Misaligned or improperly installed AutoDos PowerDisk or holder (high)
- Contamination, blockage, or dirt in the AutoDos detergent delivery system (medium)
- Internal technical fault in AutoDos electronics or mechanics (high)
How to Fix Error F601
DIY Fix Check AutoDos PowerDisk and holder alignment
- Open the dishwasher and locate the AutoDos PowerDisk holder.
- Ensure the PowerDisk is seated correctly with arrows on the holder and viewing window aligned.
- Make sure the holder is flat and the PowerDisk is flush in place.
- Start a new wash cycle with AutoDos enabled to see if the F601 error clears.
DIY Fix Clean the AutoDos system
- Deactivate the dishwasher and open the detergent dosing compartment.
- Clean visible detergent residues and rinse any accessible AutoDos components gently with water.
- Remove any obstruction that may prevent detergent flow.
- Restart the dishwasher with AutoDos enabled.
DIY Fix Disable AutoDos and manually dispense detergent
- In the dishwasher program menu, deactivate the AutoDos function.
- Add detergent manually to the detergent compartment before starting a cycle.
- Run a wash cycle and monitor whether the error recurs.
Technician Only Inspect and service the AutoDos module
- Perform diagnostic tests on the AutoDos electronic control and sensors.
- Check wiring harnesses and connectors for continuity and damage.
- Replace the AutoDos module or related components if diagnostics confirm a malfunction.
Parts needed: AutoDos control module, PowerDisk holder assembly, Associated wiring harness
- If the error persists after checking alignment and cleaning AutoDos
- If the error appears intermittently with otherwise normal operation
- If the dishwasher stops mid‑cycle or displays additional error codes
Next step
Choose the next step for F601
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | Miele 1016400 |
| voltage_rating | 120V AC |
Common Questions
What does F601 error mean on miele dishwasher?
F601 indicates a malfunction in the AutoDos system, preventing proper detergent dispensing.
Can I fix miele dishwasher F601 error myself?
Yes, check the AutoDos alignment, clean the delivery system, or manually dispense detergent.
How much does it cost to fix F601 error?
Estimated repair costs range from $150 to $400, depending on parts and region.
When should I call a technician for F601?
Call a technician if the error persists after DIY checks or if additional errors occur.
Sources & References
- Miele Dishwasher Fault F601 (Germany support) (official)
- Miele Dishwasher Fault F601 (Hong Kong support) (official)
- Miele Dishwasher Fault F601 (UK support) (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!