Miele Dishwasher Error F600

⚡ Quick Answer: The Miele dishwasher F600 error indicates a failure in the AutoDos detergent dispensing system, often resulting in the wash program canceling unexpect... ✅ DIY Fixable

What Does Error F600 Mean?

The Miele dishwasher F600 error indicates a failure in the AutoDos detergent dispensing system, often resulting in the wash program canceling unexpectedly. Symptoms include the drain pump running continuously, error notifications via display or LEDs, and unusual beeping sounds. This error typically arises from a blockage or contamination in the AutoDos outlet, preventing proper detergent dosing and affecting cleaning performance.

Common Symptoms:

  • Wash program cancels immediately when error occurs
  • Drain pump starts running when error is sensed
  • Error indicated by display or LEDs, accompanied by multiple beeps
  • AutoDos system reported as blocked or malfunctioning

Possible Causes

  • AutoDos dispensing outlet blockage or contamination (high)
  • Moisture or residue inside the AutoDos system causing dosing failure (medium)

How to Fix Error F600

DIY Fix Clean spray arms and AutoDos system

  1. Turn off dishwasher and disconnect from power
  2. Remove lower and upper spray arms
  3. Clean spray arms of debris and rinse thoroughly
  4. Clean AutoDos compartment: remove PowerDisk, clean housing and dosing channel with a soft brush and water, dry completely
  5. Reinstall all components and ensure correct placement of PowerDisk

DIY Fix Check filters and basic blockages

  1. Remove and clean dishwasher filters under running water to clear debris
  2. Check that drain areas and spray arm openings are free from obstructions
  3. Verify spray arms rotate freely
  4. Restart dishwasher to see if error returns

Technician Only Inspect AutoDos mechanism and electrical connections

  1. Access internal AutoDos assembly and inspect the dosing motor and sensors for malfunction
  2. Check wiring harness and connectors for corrosion or loose connections
  3. Test AutoDos motor operation and dosing outlet feedback signals
  4. Replace faulty AutoDos parts if necessary

Parts needed: AutoDos dosing unit, wiring harness/connectors, PowerDisk holder components

🛑 When to Call a Pro:
  • After performing user-level cleaning and the F600 error persists
  • If AutoDos mechanism or dosing motor appears physically damaged
  • If internal wiring or control feedback signals are suspect

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Miele 9000520
voltage_rating 120V AC

Common Questions

What does F600 error mean on Miele dishwasher?

F600 indicates a failure in the AutoDos system, causing wash programs to cancel and improper drainage.

Can I fix Miele dishwasher F600 error myself?

Yes, you can clean the spray arms and AutoDos system to resolve the issue.

How much does it cost to fix F600 error?

Repair costs for the F600 error typically range from $100 to $400, depending on parts and labor.

When should I call a technician for F600?

Call a technician if cleaning doesn't resolve the issue or if you notice damage to the AutoDos mechanism.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!