Miele Dishwasher Error F32

⚡ Quick Answer: The Miele Dishwasher F32 error indicates a fault with the door lock mechanism, preventing normal operation. This may occur when the door appears close... ✅ DIY Fixable

What Does Error F32 Mean?

The Miele Dishwasher F32 error indicates a fault with the door lock mechanism, preventing normal operation. This may occur when the door appears closed but the lock fails to engage, often causing the dishwasher not to start or to halt immediately. Common causes include a malfunctioning door latch, misalignment, or wiring issues at the door lock.

Common Symptoms:

  • Error appears immediately when starting cycle
  • Dishwasher won’t start or begins cycle before showing error
  • Door may appear physically closed but lock not engaged

Possible Causes

  • Door lock or latch failing to engage properly (high)
  • Obstruction or misalignment preventing the lock from fully engaging (medium)
  • Wiring or sensor connection issue at the door lock (medium)

How to Fix Error F32

DIY Fix Check door closure and eliminate obstructions

  1. Open the dishwasher door fully and inspect the door seal area and latch for any dishes, utensils, or debris that may obstruct closing.
  2. Ensure racks are positioned so they do not interfere with door closing.
  3. Close the door slowly and firmly until you hear the latch click.
  4. Attempt to restart the dishwasher to see if the error clears.

DIY Fix Power cycle the dishwasher

  1. Turn off the dishwasher and disconnect from power (unplug or switch off at breaker).
  2. Wait 1–2 minutes to allow residual charge to clear.
  3. Restore power and attempt to start a wash cycle.
  4. Check if the F32 error code reappears.

Technician Only Inspect and service door lock/latch assembly

  1. Disconnect power to the appliance at the breaker.
  2. Remove the door panel or access cover to access the lock and latch assembly.
  3. Test the door lock mechanism for proper mechanical operation and examine wiring for secure connections.
  4. Replace any faulty door lock or latch components as needed and reassemble.
  5. Test operation to confirm resolution of F32 code.

Parts needed: door lock assembly, latch hardware, associated wiring/harness

Technician Only Check wiring and control interface at door lock

  1. Disconnect power to the machine.
  2. With access to the door lock area, inspect wiring harnesses and connectors for damage, corrosion, or loose connections.
  3. Use a multimeter to verify continuity where appropriate.
  4. Repair or replace wiring/connector components as necessary.
  5. Reassemble and test dishwasher function.

Parts needed: wire harness, connectors

🛑 When to Call a Pro:
  • Error persists after checking for obstructions and power cycling
  • Visible damage to the door lock hardware
  • Error occurs intermittently indicating an electrical fault

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number Miele 6262001
voltage_rating 230V AC

Common Questions

What does F32 error mean on Miele Dishwasher?

The F32 error indicates a malfunction in the door lock mechanism, preventing the dishwasher from operating.

Can I fix Miele Dishwasher F32 error myself?

Yes, check for obstructions in the door, ensure it closes properly, and power cycle the dishwasher.

How much does it cost to fix F32 error?

Estimated repair costs range from $50 to $250 for parts, plus labor depending on your region.

When should I call a technician for F32?

Call a technician if the error persists after troubleshooting or if you see visible damage to the door lock.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!