Miele Dishwasher Error F25
⚡ Quick Answer: The Miele Dishwasher F25 error indicates a malfunction in the heating system, preventing the appliance from reaching or detecting the required water t... ✅ DIY Fixable
What Does Error F25 Mean?
The Miele Dishwasher F25 error indicates a malfunction in the heating system, preventing the appliance from reaching or detecting the required water temperature. This often results in the dishwasher stopping mid-cycle, failing to heat water properly, and exhibiting poor cleaning performance. Unusual noises may also occur during operation as the drain pump struggles to function correctly.
Common Symptoms:
- Dishwasher stops mid‑cycle with F25 displayed
- Dishwasher fails to heat water properly
- Poor cleaning performance due to insufficient water temperature
Possible Causes
- Faulty or insufficient heating (heating element or related circuit) (high)
- Temperature detection/sensor error (NTC or temperature sensor) (medium)
How to Fix Error F25
DIY Fix Basic checks and reset
- Turn off the dishwasher and disconnect power for 5–10 minutes to reset the control electronics.
- Check if the dishwasher resumes normal operation after power reset.
- Ensure that water supply is connected and the machine is filled properly.
Technician Only Professional diagnosis and repair
- Inspect heating element continuity and performance with a multimeter.
- Check heater relay on the control board to ensure proper power delivery to the heating element.
- Test temperature sensor (NTC) for correct resistance values and replace if faulty.
- Verify wiring and connectors associated with heating components are secure and undamaged.
Parts needed: Heating element, Heater relay (control board), Temperature sensor (NTC), Associated wiring harness
- If error F25 persists after power reset and basic checks
- If you observe signs of component damage, burning smell, or water leakage
Next step
Choose the next step for F25
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F25 error mean on Miele Dishwasher?
F25 indicates a heating malfunction, causing the dishwasher to stop mid-cycle and fail to heat water.
Can I fix Miele Dishwasher F25 error myself?
Yes, try resetting the dishwasher by turning it off and disconnecting power for 5-10 minutes.
How much does it cost to fix F25 error?
Repair costs range from $150 to $450+, depending on parts and labor.
When should I call a technician for F25?
Call if the error persists after a reset or if you notice component damage, burning smells, or leaks.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!