Miele Dishwasher Error F172
⚡ Quick Answer: The Miele dishwasher error F172 indicates a malfunction related to the drain pump, characterized by the dishwasher stopping operation and the display ... ✅ DIY Fixable
What Does Error F172 Mean?
The Miele dishwasher error F172 indicates a malfunction related to the drain pump, characterized by the dishwasher stopping operation and the display of the F172 code. This technical fault may cause unusual noises during operation or prevent water from draining properly. While the manufacturer does not specify a particular subsystem failure, the general cause is an internal technical issue requiring attention.
Common Symptoms:
- Dishwasher displays F172 and stops operation
- No specific subsystem (e.g., water inlet, heater, pump) indicated by manufacturer
Possible Causes
- General internal technical fault as defined by Miele (high)
How to Fix Error F172
DIY Fix Restart and basic checks
- Turn off the dishwasher at the mains
- Wait 1–2 minutes
- Turn the dishwasher back on to see if the code clears
Technician Only Diagnostic and repair by qualified service
- Perform full diagnostic using Miele service tools
- Check the control board, firmware, and any AutoDos/dosing modules
- Replace faulty internal components as indicated by diagnostics
Parts needed: Control electronics board, Firmware module, Possible dosing/AutoDos components
- If the F172 code persists after power cycling
- If the dishwasher will not complete a cycle or shows other abnormal behavior
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 5-15 ohms |
| part_number | Miele 6900320 |
| voltage_rating | 230V AC |
Common Questions
What does F172 error mean on Miele dishwasher?
F172 indicates a drain pump malfunction, causing the dishwasher to stop and display the error.
Can I fix Miele dishwasher F172 error myself?
Yes, try restarting the dishwasher by turning it off for 1-2 minutes to see if the error clears.
How much does it cost to fix F172 error?
Repair costs vary widely by region and fault, typically moderate to high for control board/system issues.
When should I call a technician for F172?
Call a technician if the F172 code persists after power cycling or if the dishwasher shows other abnormal behavior.
Sources & References
- Miele support article for fault F172 (USA) (official)
- Miele support article for Fehler F172 (Germany) (official)
Data last verified: 2026-07-07
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!