Miele Dishwasher Error F170
⚡ Quick Answer: The Miele dishwasher error F170 signifies a low rinse aid level, preventing optimal washing performance. This error may cause the dishwasher to pause ... ✅ DIY Fixable
What Does Error F170 Mean?
The Miele dishwasher error F170 signifies a low rinse aid level, preventing optimal washing performance. This error may cause the dishwasher to pause and display the F170 code until the rinse aid is replenished. Unusual sounds during operation may also accompany this malfunction. To resolve the issue, refill the rinse aid reservoir, usually located near the detergent compartment, and ensure the lid is securely closed.
Common Symptoms:
- Display shows F170 when rinse aid level is low
- Dishwasher may pause or signal until rinse aid is refilled
Possible Causes
- Low or empty rinse aid reservoir (high)
How to Fix Error F170
DIY Fix Refill rinse aid and confirm
- Locate the rinse aid reservoir in your Miele dishwasher (usually near the detergent compartment).
- Refill with appropriate rinse aid until full.
- Close the reservoir lid securely.
- Press the OK or confirm button on the dishwasher to acknowledge and clear the F170 message.
Technician Only Inspect rinse aid system and sensors
- Verify that the rinse aid reservoir and float sensor (if present) are functioning correctly.
- Check for clogs or deposits around the dosing mechanism.
- Inspect wiring to the rinse aid level sensor for continuity or damage.
- Test operation with diagnostic tools to confirm the rinse aid level sensor reads correctly.
Parts needed: Rinse aid reservoir, Rinse aid level sensor/float, Associated wiring harness
- If refill and confirmation do not clear the code after several cycles
- If the rinse aid reservoir or level sensor appears damaged or not registering correctly
Next step
Choose the next step for F170
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F170 error mean on miele dishwasher?
The F170 error indicates a low rinse aid level, causing the dishwasher to pause its operation.
Can I fix miele dishwasher F170 error myself?
Yes, you can refill the rinse aid reservoir to clear the F170 error.
How much does it cost to fix F170 error?
Repair costs range from $30 to $120 for parts, plus labor.
When should I call a technician for F170?
Call a technician if the error persists after refilling rinse aid or if components seem damaged.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!