Miele Dishwasher Error F17

⚡ Quick Answer: The Miele dishwasher F17 error code suggests a drainage issue, commonly indicated by a persistent beeping sound and the error display. To troubleshoot... ✅ DIY Fixable

What Does Error F17 Mean?

The Miele dishwasher F17 error code suggests a drainage issue, commonly indicated by a persistent beeping sound and the error display. To troubleshoot, turn off the dishwasher for 30 seconds, ensure the door is securely closed, and check that the water supply is on with adequate pressure. If the error persists, further inspection may be needed.

Possible Causes

  • Blocked drain pump
  • Faulty drain hose
  • Clogged filter

How to Fix Error F17

DIY Fix General checks when a Miele dishwasher displays an unlisted error code

  1. Turn the dishwasher off, wait 30 seconds, then power it back on to see if the code persists.
  2. Ensure the door is fully closed and latched securely before starting a cycle.
  3. Check basic water supply and drainage: ensure the water faucet feeding the dishwasher is open and water pressure is normal.
  4. Inspect visible hoses for kinks or severe bends.
  5. Consult the specific model’s official manual for any model‑specific error table.

Technician Only Professional diagnosis for unrecognized error code

  1. Connect diagnostic service tool to read service codes from dishwasher’s control board.
  2. Consult Miele service documentation or contact Miele technical support to interpret F17 code.
  3. Perform checks on common fault areas: water inlet valve, float/lid switch, control board communications.
  4. Verify wiring harness connections and sensor inputs for anomalies.

Parts needed: Multimeter/diagnostic tool, Possible sensor modules (water level, pressure, temperature), Control board if found faulty

🛑 When to Call a Pro:
  • If the error code reappears after power cycling
  • If the dishwasher will not start or fill with water
  • If there are signs of water leakage, unusual noises, or electrical smell

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number Miele 6102020
voltage_rating 230V AC

Common Questions

What does F17 error mean on Miele dishwasher?

F17 indicates a drainage problem, often accompanied by a beeping sound.

Can I fix Miele dishwasher F17 error myself?

Yes, you can try turning off the dishwasher, checking the door latch, and ensuring the water supply is open.

How much does it cost to fix F17 error?

Repair costs can vary widely; a professional service call is typically required.

When should I call a technician for F17?

Call a technician if the error reappears after power cycling or if there are signs of leakage or unusual noises.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!