Miele Dishwasher Error F13

⚡ Quick Answer: The Miele dishwasher error F13 indicates a water inlet issue, preventing the unit from filling with water. This may result in a humming sound and an i... ✅ DIY Fixable

What Does Error F13 Mean?

The Miele dishwasher error F13 indicates a water inlet issue, preventing the unit from filling with water. This may result in a humming sound and an inability for the dishwasher to complete cycles due to insufficient water. Common causes include a closed water supply valve, a clogged inlet filter, or a kinked inlet hose. Proper troubleshooting is essential to restore normal operation.

Common Symptoms:

  • Dishwasher fails to fill with water
  • Cycle stops shortly after start with F13 code
  • Insufficient water for wash cycle

Possible Causes

  • Closed or partially closed water supply valve (high)
  • Soiled or clogged inlet filter (high)
  • Kinked or blocked water inlet hose (high)
  • Low water pressure at the supply connection (high)
  • Faulty water inlet valve (medium)

How to Fix Error F13

DIY Fix Check and ensure proper water supply

  1. Confirm the water supply valve/stopcock feeding the dishwasher is fully open.
  2. Inspect the water inlet hose for any kinks or sharp bends and straighten them.
  3. Check for visible low water pressure at the tap feeding the dishwasher.
  4. Clean the inlet filter at the water connection as per manufacturer guidelines, ensuring correct reinstallation.

Technician Only Inspect and service water inlet valve and related components

  1. Turn off power and water supply to the dishwasher.
  2. Remove access panels to reach the water inlet valve assembly.
  3. Test the inlet valve for proper operation and replace if malfunctioning.
  4. Verify correct water pressure and line integrity up to the appliance.
  5. Confirm no internal restriction (e.g., debris in valve or hose) remains post-cleaning.

Parts needed: water inlet valve, inlet hose, inlet filter screen

🛑 When to Call a Pro:
  • If F13 persists after basic user-level checks and cleaning.
  • Visible damage to the water inlet hose or valve.
  • Water pressure appears adequate but unit still fails to fill.

Technical Specifications

wattage 50W
component Drain Pump
resistance 20-30 ohms
part_number Miele 6260820
voltage_rating 230V AC

Common Questions

What does F13 error mean on Miele dishwasher?

F13 indicates a water inlet fault, preventing the dishwasher from filling with water.

Can I fix Miele dishwasher F13 error myself?

Yes, check the water supply valve, inspect the inlet hose for kinks, and clean the inlet filter.

How much does it cost to fix F13 error?

Repair costs range from $80 to $250, depending on parts and labor.

When should I call a technician for F13?

Call a technician if F13 persists after user checks or if there's visible damage to components.

Sources & References

Data last verified: 2026-02-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!