Miele Dishwasher Error F11
⚡ Quick Answer: The Miele dishwasher F11 error indicates a drainage issue where the machine cannot discharge water effectively. This often results in standing water i... ✅ DIY Fixable
What Does Error F11 Mean?
The Miele dishwasher F11 error indicates a drainage issue where the machine cannot discharge water effectively. This often results in standing water in the basin and is accompanied by unusual sounds from the pump. Common causes include a blocked or incorrectly installed non-return valve, a clogged drain pump impeller, or a kinked drain hose. To resolve the issue, inspect and clean the filter assembly, check the non-return valve, and ensure the drain hose is unobstructed.
Common Symptoms:
- Standing water in the dishwasher basin when the cycle should be draining
- Error F11 displayed on control panel during or after a wash cycle
- Drain pump not effectively expelling water into the drain hose
Possible Causes
- Blocked or incorrectly installed non-return (check) valve causing water to flow back into the dishwasher (high)
- Clogged or obstructed drain pump impeller or filter assembly (high)
- Blocked or kinked drain hose preventing water outflow (high)
How to Fix Error F11
DIY Fix Basic drainage checks and cleaning
- Turn off and disconnect dishwasher power.
- Remove and inspect filter assembly at the bottom of the dishwasher; clean all debris.
- Check and clean the non-return (check) valve; ensure correct orientation on reinstallation.
- Inspect the drain hose for kinks or blockages; straighten or clear as needed.
- Restart dishwasher to see if F11 clears.
Technician Only Professional diagnosis and part replacement
- Disconnect dishwasher from power and water supply.
- Remove access panels to inspect drain pump, impeller, and internal hoses.
- Test drain pump operation and continuity; replace pump if defective.
- Check and, if needed, replace non-return valve and drain hose components.
- Verify no underlying installation or plumbing issues (e.g., sink/garbage disposal blockage).
Parts needed: Drain pump, Non-return (check) valve, Drain hose
- If F11 persists after basic cleaning and inspection of filters, valves, and hose.
- If water leaks occur or parts appear damaged upon inspection.
- If drain pump tests show no operation when commanded.
Next step
Choose the next step for F11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Miele 6060660 |
| voltage_rating | 120V AC |
Common Questions
What does F11 error mean on Miele dishwasher?
The F11 error indicates a drainage issue, often with standing water in the basin.
Can I fix Miele dishwasher F11 error myself?
Yes, you can check and clean the filter assembly, non-return valve, and drain hose.
How much does it cost to fix F11 error?
Repair costs range from $150 to $500, depending on the model and region.
When should I call a technician for F11?
Call a technician if the error persists after basic cleaning or if parts are damaged.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!