Miele Dishwasher Error F10
⚡ Quick Answer: The Miele dishwasher error F10 indicates a water supply issue, preventing the dishwasher from filling with water. This error often arises when the wat... ✅ DIY Fixable
What Does Error F10 Mean?
The Miele dishwasher error F10 indicates a water supply issue, preventing the dishwasher from filling with water. This error often arises when the water supply is turned off, the inlet hose is kinked or blocked, or there is a malfunction with the water inlet valve. Users may notice that the dishwasher does not progress through its cycle, as it fails to reach the necessary water level for operation.
Common Symptoms:
- Dishwasher displays F10 instead of progressing in cycle
- Dishwasher does not fill with water at start of wash
- Cycle does not begin because water level is not reached
Possible Causes
- Water supply not turned on / inaccessible (medium)
- Kinked or blocked water inlet hose (medium)
- Water inlet valve malfunction (medium)
How to Fix Error F10
DIY Fix Check basic water supply
- Ensure the kitchen water supply to the dishwasher is fully turned on at the stopcock.
- Verify that the water inlet hose behind the dishwasher is not kinked or crushed.
- Inspect visible hose connections for leaks or twists that might restrict flow.
Technician Only Inspect and test inlet components
- Disconnect and inspect the water inlet hose for internal blockages.
- Test the water inlet valve for proper operation and replace if faulty.
- Check wiring to the inlet valve/pressure switch for continuity and secure connections.
Parts needed: Water inlet valve, Water inlet hose, Pressure switch or flow sensor (if applicable)
- If water supply and hoses are verified OK but dishwasher still does not fill with water.
- If replacing inlet components does not clear the F10 error.
- If you are not comfortable working with water line components.
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Water Supply Hose
Connects your home water valves to the water inlet valve on the appliance.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F10 error mean on Miele dishwasher?
F10 indicates a water supply issue, preventing the dishwasher from filling and completing its cycle.
Can I fix Miele dishwasher F10 error myself?
Yes, check the water supply, ensure hoses are not kinked, and inspect for leaks.
How much does it cost to fix F10 error?
Estimated repair cost ranges from $80 to $250, depending on parts and labor.
When should I call a technician for F10?
Call a technician if the water supply and hoses are fine but the issue persists or if you're uncomfortable working with water lines.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!