Miele Dishwasher Error F08
⚡ Quick Answer: The Miele dishwasher error F08 indicates a problem with the drainage system, specifically related to water level and pressure irregularities during fi... ✅ DIY Fixable
What Does Error F08 Mean?
The Miele dishwasher error F08 indicates a problem with the drainage system, specifically related to water level and pressure irregularities during filling or monitoring. This error often causes the dishwasher to stop early in the wash cycle and may produce unusual sounds. Common causes include inadequate water intake due to pressure or flow rate issues, or a fault in the water level sensing components. Regularly checking your water supply and connections can help resolve this issue.
Common Symptoms:
- Dishwasher stops during fill or early in the wash cycle
- Error appears soon after start without progressing to full cycle
- Unit indicates inability to detect correct water level
Possible Causes
- Improper water intake (pressure or flow rate insufficient) (medium)
- Water level / pressure sensing component fault (medium)
How to Fix Error F08
DIY Fix Check water supply and basic connections
- Ensure the household water supply valve to the dishwasher is fully open.
- Check that the water inlet hose is not kinked or crushed.
- Inspect visible inlet filter (if accessible) for debris or blockage.
Technician Only Inspect and test water level / pressure sensing components
- Test water inlet valve operation to confirm it opens fully and allows correct flow.
- Measure water pressure at the inlet to verify minimum required pressure is met.
- Check pressure switch or water level sensor operation and associated wiring for faults.
- If sensors or valves are faulty, replace with manufacturer‑specified parts.
Parts needed: Water inlet valve, Pressure switch / water level sensor, Hoses and connectors
- If basic water supply checks do not resolve the issue
- If error persists after resetting the dishwasher and verifying hoses and filters
- If technician diagnosis reveals internal sensor or valve faults
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 30-50 ohms |
| part_number | Miele 6261230 |
| voltage_rating | 230V AC |
Common Questions
What does F08 error mean on Miele dishwasher?
F08 error indicates issues with water level and drainage, causing early cycle stops.
Can I fix Miele dishwasher F08 error myself?
Yes, check the water supply, connections, and inlet filter for blockages.
How much does it cost to fix F08 error?
Repair costs are moderate and vary by region and specific parts needed.
When should I call a technician for F08?
Call a technician if basic checks don't resolve the issue or if internal faults are suspected.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!