Maytag Microwave Error SE
⚡ Quick Answer: The Maytag Microwave SE error indicates a malfunction in the control panel or keypad, commonly linked to shorted or malfunctioning button contacts. Th... ✅ DIY Fixable
What Does Error SE Mean?
The Maytag Microwave SE error indicates a malfunction in the control panel or keypad, commonly linked to shorted or malfunctioning button contacts. This issue often results in unresponsive buttons and an erratic display. If the error persists even after a power cycle, it may require professional inspection of the keypad and internal wiring.
Common Symptoms:
- Error code SE displayed on the control panel
- Buttons unresponsive or microwave does not accept input
- Persistent error even after basic power cycle
Possible Causes
- Faulty Keypad/User Interface (high)
- Stuck or Shorted Button Contacts (medium)
- Moisture/Contamination Under Keypad (medium)
How to Fix Error SE
DIY Fix Power Cycle and Basic Inspection
- Turn off and unplug the microwave from the power outlet.
- Wait at least 60 seconds.
- Plug the microwave back in and check if the SE code persists.
- Inspect the keypad surface for stuck or visibly damaged buttons; gently clean around buttons with a dry cloth.
Technician Only Keypad/Control Panel Diagnosis and Repair
- Disconnect power and remove microwave outer cover.
- Inspect keypad ribbon cable and connections for corrosion, looseness, or damage.
- Test keypad and control board with multimeter for continuity and shorts.
- Replace faulty keypad assembly or control board as indicated by testing.
Parts needed: Keypad assembly, Control board (if necessary)
- If the SE error remains after basic power cycling and keypad cleaning.
- If you detect internal wiring damage or are uncomfortable performing internal diagnostics.
Next step
Choose the next step for SE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Microwave parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does SE error mean on Maytag Microwave?
The SE error indicates a control panel issue, often causing unresponsive buttons.
Can I fix Maytag Microwave SE error myself?
Yes, you can power cycle the microwave and inspect the keypad for issues.
How much does it cost to fix SE error?
Repair costs range from $50 to $250+ depending on parts and labor.
When should I call a technician for SE?
Call a technician if the error persists after troubleshooting or if there's internal damage.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!