Magic Chef Washer Dryer Error E50
⚡ Quick Answer: The Magic Chef washer dryer E50 error indicates a malfunction in the motor drive unit, often causing the appliance to fail to start or produce unusual... ✅ DIY Fixable
What Does Error E50 Mean?
The Magic Chef washer dryer E50 error indicates a malfunction in the motor drive unit, often causing the appliance to fail to start or produce unusual noises during operation. It may relate to spin or drive failures, or door lock issues, particularly if the drum fails to complete the spin cycle but drains water normally. Symptoms include the E50 code appearing during or at the end of a cycle and a whirring sound during the spin cycle.
Common Symptoms:
- Washer displays E50 during or at the end of the cycle (community report)
- Whirring sound during spin cycle (community report)
- Drum fails to complete spin but water drains normally (community report)
Possible Causes
- Spin cycle / drum drive failure or imbalance (low)
- Door lock or latch mechanism issue (potentially related) (low)
How to Fix Error E50
DIY Fix Check load balance and reset
- Turn off and unplug the washer dryer.
- Open door and redistribute laundry to balance the load evenly.
- Close the door securely and plug the unit back in.
- Run a short spin cycle only to see if the error reoccurs.
Technician Only Inspect motor drive, door lock, and suspension
- Verify proper operation of the door lock/interlock assembly and replace if faulty.
- Check drum movement by hand for smooth rotation; inspect bearings and motor clutch.
- Test motor wiring, tachometer, and drive components for continuity or faults.
- Examine suspension springs and shock absorbers for wear or damage.
Parts needed: Door lock/interlock assembly, Drive motor / motor clutch, Suspension springs / shocks, Wiring harness and connectors
- If error persists after balancing load and resetting
- If unusual noises continue or mechanical binding is suspected
- If the door fails to lock or unlock consistently
Next step
Choose the next step for E50
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E50 error mean on magic chef washer dryer?
E50 indicates a motor drive malfunction, causing startup failures or unusual noises.
Can I fix magic chef washer dryer E50 error myself?
Yes, try redistributing the load and resetting the unit by unplugging it.
How much does it cost to fix E50 error?
Repair costs typically range from $150 to $400, depending on parts and service rates.
When should I call a technician for E50?
Call a technician if the error persists after trying to balance the load or if unusual noises continue.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!