Magic Chef Oven Error F8

⚡ Quick Answer: The Magic Chef Oven F8 error code indicates a malfunction in the temperature sensor or control board. This may lead to erratic temperature readings an... ✅ DIY Fixable

What Does Error F8 Mean?

The Magic Chef Oven F8 error code indicates a malfunction in the temperature sensor or control board. This may lead to erratic temperature readings and can prevent the oven from starting or completing a self-clean cycle. The issue is often related to an analog/digital converter fault within the Electronic Range Control (ERC).

Common Symptoms:

  • Error F8 shown on control display
  • Oven may not start self‑clean or may stop during self‑clean cycle

Possible Causes

  • Analog/Digital converter fault in control board (Electronic Range Control) (medium)

How to Fix Error F8

DIY Fix Basic display and power reset

  1. If safe, disconnect the oven from power by turning off the breaker or unplugging.
  2. Wait 1–2 minutes to allow control board capacitors to discharge.
  3. Restore power and check if the F8 error clears on initial power‑up.

Technician Only Inspect/replace Electronic Range Control (ERC) / control board

  1. Verify the oven model and obtain the correct ERC/control board part.
  2. Disconnect power at the breaker.
  3. Access and remove the oven control board per the service manual.
  4. Inspect wiring harnesses for corrosion, loose connectors, or damage.
  5. Replace the control board or send out for ERC repair if analog/digital converter failure is confirmed.
  6. Reassemble and test oven operation.

Parts needed: Electronic Range Control (control board), associated wiring harness connectors

🛑 When to Call a Pro:
  • If unable to safely access control board or if error persists after power reset and control board replacement

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number MC-TS-001
voltage_rating 120V AC

Common Questions

What does F8 error mean on Magic Chef Oven?

F8 indicates a temperature sensor malfunction or control board failure, causing erratic readings.

Can I fix Magic Chef Oven F8 error myself?

Yes, you can try a power reset by disconnecting the oven from power for 1-2 minutes.

How much does it cost to fix F8 error?

Repair costs range from $150 to $400, depending on parts and technician labor.

When should I call a technician for F8?

Call a technician if the error persists after a power reset or if you can't safely access the control board.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!