Liebherr Refrigerator Error F8

⚡ Quick Answer: The Liebherr refrigerator F8 error code indicates a potential failure in the condenser temperature sensor, which can lead to fluctuating temperatures ... ⚠️ Difficulty Varies

What Does Error F8 Mean?

The Liebherr refrigerator F8 error code indicates a potential failure in the condenser temperature sensor, which can lead to fluctuating temperatures and inconsistent cooling performance. This may cause alarms to sound and the compressor to cycle irregularly, affecting both the refrigerator and freezer compartments. Addressing this issue promptly is crucial to maintaining optimal cooling efficiency.

Common Symptoms:

  • Display shows F8 code
  • Potential alarm sounding
  • Refrigerator/freezer may not cool properly
  • Compressor may be off or cycling irregularly

Possible Causes

  • Condenser temperature sensor fault or overheat condition (low)

How to Fix Error F8

DIY Fix Basic checks and safety

  1. Ensure unit is powered and unplugged before inspecting
  2. Check that vents and condenser coils are clean and free of dust/debris
  3. Verify the refrigerator is not in an unusually hot environment

Technician Only Inspect/replace condenser temperature sensor and related components

  1. Unplug refrigerator and access rear condenser area
  2. Locate the condenser temperature/NTC sensor and inspect wiring for damage or loose connections
  3. Test the sensor’s resistance against expected values (requires service manual/schematics)
  4. Replace the sensor if faulty
  5. Ensure condenser area airflow is unobstructed

Parts needed: Condenser temperature (NTC) sensor, Possibly wiring harness or clips

🛑 When to Call a Pro:
  • If error persists after basic cleaning and visual inspection
  • If you do not have experience handling electrical components
  • If replacing the sensor does not resolve the F8 code

Next step

Choose the next step for F8

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms
part_number Liebherr 7470930
voltage_rating 12V DC

Common Questions

What does F8 error mean on Liebherr refrigerator?

The F8 error indicates a potential fault in the condenser temperature sensor, causing cooling issues.

Can I fix Liebherr refrigerator F8 error myself?

Yes, you can perform basic checks like cleaning vents and ensuring proper environment before calling a technician.

How much does it cost to fix F8 error?

The estimated repair cost for the F8 error is between $50 and $150, depending on parts and labor.

When should I call a technician for F8?

Call a technician if the error persists after basic checks or if you are inexperienced with electrical components.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!