Liebherr Oven Error F13

⚡ Quick Answer: The Liebherr oven error F13 indicates a malfunction related to the meat probe or core temperature sensor. This error typically occurs when the oven fa... ✅ DIY Fixable

What Does Error F13 Mean?

The Liebherr oven error F13 indicates a malfunction related to the meat probe or core temperature sensor. This error typically occurs when the oven fails to recognize a connected probe or if there's an issue with the sensor circuit. Symptoms include the display showing F13 during probe use, failure of cooking functions that rely on the probe, and possible unusual sounds from the oven. Ensuring the probe is properly connected and checking for any visible damage can help resolve the issue.

Common Symptoms:

  • Display shows F13 when meat probe function is used or expected
  • Oven may not recognize a plugged‑in probe
  • Cooking functions involving the probe may fail

Possible Causes

  • Faulty or improperly connected meat probe sensor (medium)
  • Damaged probe socket wiring or contacts (medium)
  • Control board input circuit fault for probe detection (low)

How to Fix Error F13

DIY Fix Check probe connection and cable

  1. Ensure the correct Liebherr meat probe is used.
  2. Verify the probe is fully inserted into the socket.
  3. Inspect the probe cable for visible damage or kinks.
  4. Clean probe plug and socket contacts to remove grease or moisture.

Technician Only Diagnose probe socket and wiring

  1. Disconnect power to the oven.
  2. Access the back of the probe socket inside the oven cavity.
  3. Test continuity of the probe and the wiring from the socket to the control board.
  4. Repair or replace the probe socket or wiring harness if continuity is broken.

Parts needed: Meat probe socket, Wiring harness

Technician Only Evaluate control board probe input circuit

  1. If probe and wiring are confirmed good, test the control board’s probe detection circuit.
  2. Replace or repair the control board if the input circuit is defective.

Parts needed: Oven control board

🛑 When to Call a Pro:
  • If the probe socket or control board access requires significant disassembly beyond user competency
  • If wiring continuity tests indicate deeper electrical faults

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number Liebherr 9000250
voltage_rating 240V AC

Common Questions

What does F13 error mean on Liebherr oven?

F13 indicates a meat probe or core temperature sensor fault, often failing to recognize a plugged-in probe.

Can I fix Liebherr oven F13 error myself?

Yes, you can check the probe connection, ensure it's fully inserted, and inspect the cable for any visible damage.

How much does it cost to fix F13 error?

The estimated repair cost for F13 error is moderate, primarily involving socket or wiring repair parts and labor.

When should I call a technician for F13?

Call a technician if significant disassembly is needed or if deeper electrical faults are suspected during continuity tests.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!