LG Oven Error F10
⚡ Quick Answer: The LG oven error F10 indicates a door lock failure during the self-clean cycle, where the oven door fails to lock within one minute. This can prevent... ✅ DIY Fixable
What Does Error F10 Mean?
The LG oven error F10 indicates a door lock failure during the self-clean cycle, where the oven door fails to lock within one minute. This can prevent the self-cleaning process from starting or progressing. Common causes include a faulty door lock switch, a defective door lock motor, or issues with the control board and wiring related to the door lock circuit.
Common Symptoms:
- Error F10 displayed on the oven control panel during or when initiating self‑clean mode
- Self‑clean cycle does not proceed
- Oven remains locked or does not progress past the door lock stage
Possible Causes
- Faulty door lock switch (medium)
- Defective door lock motor (medium)
- Control board or wiring issue related to door lock circuit (low)
How to Fix Error F10
DIY Fix Check and retry the self‑clean cycle
- Ensure the oven door is fully closed and nothing is obstructing the latch mechanism.
- Cancel any current cycle and wait for the oven to cool if necessary.
- Attempt to start the self‑clean cycle again, observing whether the door locks within about 60 seconds.
Technician Only Inspect and repair/replace door lock assembly
- Disconnect power to the oven at the breaker.
- Access and test the door lock switch for continuity and proper operation.
- Test or replace the door lock motor if it fails to engage.
- Examine wiring and connectors between the door lock assembly and control board.
Parts needed: door lock switch, door lock motor, associated wiring/connectors
- If the door lock mechanism shows signs of mechanical damage or binding that prevents proper locking.
- If testing shows control board faults or no continuity in the door lock switch/motor circuits.
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10k ohms at room temperature |
| part_number | LG 6323B62601 |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on LG oven?
The F10 error indicates a door lock failure during the self-clean cycle, preventing the oven from locking and starting.
Can I fix LG oven F10 error myself?
Yes, check the door latch for obstructions, ensure it closes properly, and retry the self-clean cycle.
How much does it cost to fix F10 error?
Repair costs for the F10 error typically range from $80 to $250, depending on parts and labor.
When should I call a technician for F10?
Call a technician if there is mechanical damage to the door lock or if control board faults are detected.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!