LG Oven Error CF1
⚡ Quick Answer: The LG oven error code CF1 indicates a malfunction with the LF (Left Front) top temperature sensor, resulting in erratic temperature readings or a com... ✅ DIY Fixable
What Does Error CF1 Mean?
The LG oven error code CF1 indicates a malfunction with the LF (Left Front) top temperature sensor, resulting in erratic temperature readings or a complete failure to heat. This issue may cause the oven to stop functioning as a safety measure to protect its internal components. If the error persists, it usually signals an open or short circuit in the sensor wiring.
Common Symptoms:
- CF1 appears on oven/range display
- Oven may stop heating or shut down to protect internal components
Possible Causes
- LF top sensor (cooktop/oven) circuit open or short (medium)
How to Fix Error CF1
DIY Fix Power cycle and basic check
- Turn off the oven and unplug it (or switch off at the circuit breaker) for several minutes.
- Plug the oven back in and power it on to see if the CF1 code clears.
- Ensure the oven/range has stabilized at room temperature before further use.
Technician Only Inspect and replace LF top sensor or repair wiring
- Disconnect power to the oven/range at the breaker.
- Access the sensor circuitry corresponding to the left front/top area (may require panel removal).
- Visually inspect wiring, connectors, and sensor for damage or signs of short/open circuit.
- Test the sensor and its circuit with a multimeter for proper resistance and continuity.
- Replace the sensor and repair any damaged wiring as needed.
Parts needed: LF top sensor (temperature sensor), Wiring harness/connectors
- If the CF1 code persists after power cycling
- If visible wiring damage or sensor faults are detected
- If you are not comfortable performing internal electrical diagnostics
Next step
Choose the next step for CF1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10-30 ohms |
| part_number | LG 6323A20032A |
| voltage_rating | 120V AC |
Common Questions
What does CF1 error mean on LG oven?
CF1 error indicates a malfunction in the left front temperature sensor, causing erratic heating.
Can I fix LG oven CF1 error myself?
Yes, you can try power cycling the oven and checking for room temperature stabilization.
How much does it cost to fix CF1 error?
The estimated cost to fix the CF1 error ranges from ¥5,000 to ¥20,000 for parts only.
When should I call a technician for CF1?
Call a technician if the error persists after power cycling or if you notice wiring damage.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!