LG Dryer Error E13
⚡ Quick Answer: The LG dryer error code E13 signifies a malfunction related to the heating element or steam system. Common symptoms include the dryer stopping mid-cyc... ✅ DIY Fixable
What Does Error E13 Mean?
The LG dryer error code E13 signifies a malfunction related to the heating element or steam system. Common symptoms include the dryer stopping mid-cycle, failure of the steam function on equipped models, and incomplete drying cycles. The issue often stems from the steam system's water supply or a fault in the steam generator. Addressing these problems promptly can restore effective drying performance.
Common Symptoms:
- Dryer stops and displays E13 on control panel
- Steam cycle fails to operate (on models with steam function)
- Dryer may not complete cycle
Possible Causes
- Steam system water supply or steam generator fault (medium)
- Drain system error (possibly on models with drain/pump systems) (low)
How to Fix Error E13
DIY Fix Basic checks before service
- Turn off and unplug the dryer.
- If your model has a steam function, check that the water supply is connected and the inlet valve is open.
- Inspect visible hoses (steam water inlet or drain hose) for kinks, leaks, or obstructions.
- Clean the inlet filter screen if accessible on steam models.
- Reset the dryer by unplugging it for a few minutes and powering back on.
Technician Only Technician diagnostics and repair
- Verify model specifics and reference service manual for error code definitions.
- Test water inlet valve, steam generator assembly, and associated sensors on steam‑equipped units.
- Check drain pump, drain hose, and water level detection circuitry if applicable to the specific model.
- Inspect wiring and connectors to control board related to steam/drain systems.
- Replace faulty components as identified.
Parts needed: Steam water inlet valve, Steam generator assembly, Steam system sensors, Drain pump and hose, Control board connectors
- If basic checks do not clear the code
- If water leakage is observed
- If internal components (steam or drain systems) need disassembly
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E13 error mean on LG dryer?
The E13 error indicates a heating element malfunction or steam system issue, causing the dryer to stop and not complete cycles.
Can I fix LG dryer E13 error myself?
Yes, you can perform basic checks such as ensuring the steam water supply is connected and inspecting hoses for kinks or leaks.
How much does it cost to fix E13 error?
Repair costs for the E13 error typically range from $100 to $400+, depending on the required parts and labor.
When should I call a technician for E13?
Call a technician if basic troubleshooting doesn't resolve the issue, if you observe water leakage, or if internal components need disassembly.
Sources & References
- LG Dryer - Error Code List (New) (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!