Lg Dehumidifier Error CH01
⚡ Quick Answer: The LG dehumidifier error code CH01 indicates a malfunction in the humidity sensor, which may lead to erratic readings or prevent the unit from operat... ✅ DIY Fixable
What Does Error CH01 Mean?
The LG dehumidifier error code CH01 indicates a malfunction in the humidity sensor, which may lead to erratic readings or prevent the unit from operating correctly. This issue can stem from a faulty humidity or temperature sensor, a bad connection, or a control board issue affecting sensor readings.
Common Symptoms:
- Error code CH01 displayed on panel
- Unit fails to operate or stops shortly after attempting to run
- Possible false full bucket indication alongside CH01
- No normal dehumidification despite power
Possible Causes
- Humidity or temperature sensor malfunction or bad connection (high)
- Faulty control board connection affecting sensor readings (medium)
How to Fix Error CH01
DIY Fix Basic reset and initial checks
- Unplug the dehumidifier from power.
- Wait at least 3–5 minutes to allow internal capacitors to discharge.
- Ensure water bucket is properly seated and empty.
- Plug unit back in and power on to see if CH01 clears.
Technician Only Inspect and repair internal sensor circuitry
- Disconnect power to the unit.
- Remove access panels to locate humidity and temperature sensors and their wiring harness.
- Check for loose, corroded, or damaged connectors and repair or replace as needed.
- If sensors are faulty, replace with genuine LG parts.
- Verify control board connections and test for proper communication between sensors and board.
Parts needed: Humidity sensor, Temperature sensor, Sensor wiring harness, Control board (if determined faulty)
- If CH01 persists after reset and basic checks, call professional service.
- If there are signs of electrical damage such as burning smell, smoke, or unusual noises.
Technical Specifications
| wattage | 300W |
|---|---|
| component | Humidity Sensor |
| resistance | 10-20 ohms |
| part_number | LG 4681A20001D |
| voltage_rating | 120V AC |
Common Questions
What does CH01 error mean on lg dehumidifier?
CH01 indicates a humidity sensor malfunction, causing erratic readings or operational failure.
Can I fix lg dehumidifier CH01 error myself?
Yes, try unplugging the unit for 3-5 minutes and ensure the water bucket is properly seated and empty.
How much does it cost to fix CH01 error?
Repair costs typically range from $75 to $250, depending on the specific part that needs replacement.
When should I call a technician for CH01?
Call a professional if CH01 persists after basic troubleshooting or if you notice signs of electrical damage.
Sources & References
- LG Dehumidifier - Error Code List (official)
Data last verified: 2026-01-10
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!