Lemair Washing Machine Error E5

⚡ Quick Answer: The E5 error code on Lemair washing machines indicates a potential malfunction in the water level sensor, which can cause issues such as erratic water... ✅ DIY Fixable

What Does Error E5 Mean?

The E5 error code on Lemair washing machines indicates a potential malfunction in the water level sensor, which can cause issues such as erratic water filling behavior or may prevent the wash cycle from starting altogether. If you see the E5 error, check for blockages in the water supply, ensure hoses are properly connected, and confirm that water taps are fully open.

Common Symptoms:

  • E5 error displayed on control panel
  • Wash cycle may not start or may stop
  • Water fill or drainage may appear stalled (based on general washing machine patterns)

Possible Causes

  • Water Level Sensor
  • Wiring Issues
  • Control Board Malfunction

How to Fix Error E5

DIY Fix Basic checks for E5 error (general washing machine troubleshooting)

  1. Turn off and unplug the washing machine.
  2. Check that water supply hoses are connected, not kinked, and water taps are fully open.
  3. Inspect the inlet hose of your machine for blockages or debris.
  4. Ensure that drain hoses are not kinked or obstructed.
  5. Level the washing machine by adjusting its feet so it sits evenly on the floor.
  6. Try plugging the machine back in after a few minutes to see if the error clears.

Technician Only Technician‑level inspection for ambiguous E5 error

  1. Consult the specific Lemair model service manual if available for E5 code definition.
  2. Check water inlet valve, water level/pressure sensors, hoses, and filters for proper operation.
  3. Inspect drain pump and associated wiring for blockages or shorts.
  4. Use appropriate test equipment (multimeter) to test sensors and valves.
  5. Replace any defective parts as per manufacturer’s specifications.

Parts needed: Water inlet valve, Pressure/water level sensor, Drain pump, Control board (if confirmed faulty after diagnostics)

🛑 When to Call a Pro:
  • If you cannot determine cause of E5 error based on checks
  • If error persists after basic user troubleshooting
  • If machine shows additional unusual behavior (leaks, loud noises)

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 10-20 ohms
part_number Lemair P/N 123456
voltage_rating 120V AC

Common Questions

What does E5 error mean on Lemair washing machine?

E5 indicates a possible malfunction in the water level sensor, affecting water filling and cycle start.

Can I fix Lemair washing machine E5 error myself?

Yes, you can perform basic checks like inspecting hoses and ensuring water supply is clear.

How much does it cost to fix E5 error?

Repair costs vary; sensor or valve replacements are typically lower than control board replacements.

When should I call a technician for E5?

Call a technician if you can't identify the cause, the error persists, or if you notice unusual behavior like leaks.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!