Kleenmaid Washing Machine Error E20
⚡ Quick Answer: The E20 error code on your Kleenmaid washing machine indicates a drainage issue. This typically occurs when the machine fails to drain water within th... ✅ DIY Fixable
What Does Error E20 Mean?
The E20 error code on your Kleenmaid washing machine indicates a drainage issue. This typically occurs when the machine fails to drain water within the expected timeframe. Symptoms include water remaining in the drum after a cycle, the machine stopping mid-cycle, and unusual sounds during the draining process. Common causes include a clogged drainage path, such as a blocked hose or filter, or a malfunctioning drain pump. Addressing these issues promptly can help restore your washing machine's functionality.
Common Symptoms:
- Water remains in drum after cycle
- Machine stops mid‑cycle
- Possible unusual sounds during attempted drain
Possible Causes
- Clogged or blocked drainage path (hose, filter, pump inlet) (medium)
- Malfunctioning drain pump (medium)
How to Fix Error E20
DIY Fix Check and clear drainage path
- Turn off and unplug the machine.
- Locate and open the drain filter access (often at bottom front).
- Place a tray or towel and slowly open filter cover to drain residual water.
- Remove debris inside the drain filter and inspect hose for blockages.
- Straighten the drain hose and ensure it is not kinked.
Technician Only Inspect and service drain pump and internal drainage components
- Disconnect machine and access internal drain pump assembly.
- Test drain pump operation with power applied and check for blockages internally.
- If pump motor fails or is noisy, replace drain pump.
- Inspect drain hose and internal pipes for partial blockages or damage and clear or replace as needed.
Parts needed: Drain pump, Drain hose, Filter assembly
- If water remains and user‑level clearing does not resolve the issue
- If noise or mechanical failure is evident in the pump
- If model design prohibits safe user access to drainage components
Next step
Choose the next step for E20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E20 error mean on Kleenmaid washing machine?
The E20 error indicates a drainage failure, meaning the machine did not drain water as expected.
Can I fix Kleenmaid washing machine E20 error myself?
Yes, you can check and clear the drainage path by accessing the drain filter.
How much does it cost to fix E20 error?
The estimated repair cost for the E20 error ranges from USD $50 to $200+, depending on parts and labor.
When should I call a technician for E20?
Call a technician if the issue persists after user-level clearing, or if you notice noise or mechanical failure in the pump.
Sources & References
- E20 Washing Machine Error: A Complete Guide (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!