Kleenmaid Washing Machine Error E19
⚡ Quick Answer: The E19 error code on a Kleenmaid washing machine indicates a potential issue with the drain pump. Users may notice unusual noises during the spin cyc... ✅ DIY Fixable
What Does Error E19 Mean?
The E19 error code on a Kleenmaid washing machine indicates a potential issue with the drain pump. Users may notice unusual noises during the spin cycle, along with the machine's failure to properly drain water. To troubleshoot, start by turning the washer off and on again, ensuring the door is securely closed and latched. Check for any visible issues such as water not filling or draining, as these could contribute to the error.
Possible Causes
- Drain Pump
- Blocked Drain Hose
- Faulty Control Board
How to Fix Error E19
DIY Fix Verify error code and basic conditions
- Turn the washer off and on again to see if the code reappears.
- Ensure the door is properly closed and latched.
- Check for obvious issues such as water not filling, draining, or audible faults.
Technician Only Consult Kleenmaid technical documentation and support
- Obtain the exact model number of the washer on which E19 appeared.
- Access the specific technical/manual file for that model from Kleenmaid official sources or service manual repositories.
- Review the fault‑code table for that specific model to find any definition of E19.
- If code is still undefined, contact Kleenmaid support or authorized service for diagnostic guidance.
- If the error persists after power cycling, basic checks, and model verification, stop use and contact Kleenmaid authorized service for diagnosis.
Next step
Choose the next step for E19
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E19 error mean on Kleenmaid washing machine?
E19 indicates a malfunction in the drain pump, often causing draining issues.
Can I fix Kleenmaid washing machine E19 error myself?
Yes, start by power cycling the machine and checking the door latch.
How much does it cost to fix E19 error?
Repair costs vary by model and region; consult a technician for an estimate.
When should I call a technician for E19?
If the error persists after basic troubleshooting, contact Kleenmaid service for help.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!