Kitchenaid Wine Cooler Error CL

⚡ Quick Answer: The KitchenAid wine cooler error code CL indicates that the internal temperature is too low, potentially leading to compressor overload. Symptoms incl... ✅ DIY Fixable

What Does Error CL Mean?

The KitchenAid wine cooler error code CL indicates that the internal temperature is too low, potentially leading to compressor overload. Symptoms include the error code displayed on the control panel, lower-than-set internal temperatures, and possible ice formation inside the unit. This can be caused by a malfunctioning temperature sensor or control board, which may require professional inspection or replacement.

Common Symptoms:

  • Error code "CL" displayed on control panel.
  • Interior temperature lower than the setpoint.
  • Possible ice formation or excessively cold environment inside unit.

Possible Causes

  • Internal temperature too low (high)

How to Fix Error CL

DIY Fix Check door and temperature conditions

  1. Ensure the wine cooler door is fully closed and sealed properly.
  2. Check that the unit has not recently been heavily restocked with warm bottles that could cause temporary control misreads.
  3. Allow some time for the interior to stabilize if conditions were recently changed.

DIY Fix Power cycle the wine cooler

  1. Unplug the cooler or switch off its breaker.
  2. Wait 1–2 minutes.
  3. Restore power and observe if the CL error returns.

Technician Only Verify sensor and control operation

  1. Check the temperature sensor (thermistor) connection and placement to ensure accurate readings.
  2. Test the sensor output with appropriate diagnostic tools.
  3. Inspect control board logic for faults if sensor readings are correct but the CL code persists.

Parts needed: Temperature sensor (thermistor), Control board

🛑 When to Call a Pro:
  • Error persists after power cycling and basic checks.
  • Repeated CL errors with apparent frosting, freezing, or unexpected cooling behavior.
  • Other symptoms like significant temperature fluctuations, display malfunctions, or fan/compressor issues accompany the CL code.

Technical Specifications

wattage 100W
component Compressor
resistance 5-10 ohms
part_number W10666851
voltage_rating 120V AC

Common Questions

What does CL error mean on KitchenAid wine cooler?

CL error means the internal temperature is too low, possibly due to a compressor overload.

Can I fix KitchenAid wine cooler CL error myself?

Yes, check the door seal, ensure proper stocking, and power cycle the unit.

How much does it cost to fix CL error?

Repair costs range from $50 to $300+, depending on parts and technician fees.

When should I call a technician for CL?

Call a technician if the error persists after troubleshooting or if there are additional symptoms.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!