KitchenAid Refrigerator Error E1
⚡ Quick Answer: The KitchenAid Refrigerator E1 error indicates a malfunction in the temperature sensor, leading to incorrect temperature readings and inconsistent coo... ✅ DIY Fixable
What Does Error E1 Mean?
The KitchenAid Refrigerator E1 error indicates a malfunction in the temperature sensor, leading to incorrect temperature readings and inconsistent cooling performance. This issue often arises from a faulty temperature thermistor or related measurement problem. Symptoms include the E1 code on the control panel, inaccurate temperature displays, and potential cooling malfunctions.
Common Symptoms:
- E1 displayed on control panel
- Temperature display may show dashes or inaccurate temps
- Refrigerator cooling malfunction may accompany the code
Possible Causes
- Faulty refrigerator temperature thermistor/temperature sensor (medium)
How to Fix Error E1
DIY Fix Power Reset and Basic Checks
- Disconnect refrigerator from power (unplug or turn off breaker) for ~1 minute
- Reconnect power and monitor for E1 code reappearance
- Check temperature settings and ensure doors are fully closed
Technician Only Inspect and Replace Temperature Sensor
- Disconnect power to refrigerator
- Locate the refrigerator temperature thermistor (often in fresh food compartment interior)
- Inspect sensor and wiring for damage or poor connection
- Test thermistor resistance with multimeter and compare to spec
- Replace thermistor if faulty and verify operation
Parts needed: Temperature thermistor/sensor, Wiring harness
- If the error persists after a reset and basic checks
- If sensor and wiring tests are inconclusive or you lack experience with electrical diagnostics
- If additional error codes or cooling failures accompany E1
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E1 error mean on KitchenAid Refrigerator?
E1 error indicates a temperature sensor malfunction, causing erratic cooling and inaccurate temperature readings.
Can I fix KitchenAid Refrigerator E1 error myself?
Yes, you can perform a power reset and check temperature settings to see if the E1 code reappears.
How much does it cost to fix E1 error?
The estimated repair cost for the E1 error ranges from $50 to $150.
When should I call a technician for E1?
Call a technician if the error persists after a reset, or if testing the sensor and wiring is inconclusive.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!