KitchenAid Oven Error F2E3
⚡ Quick Answer: The KitchenAid Oven F2E3 error indicates a malfunction in the user interface or control board, leading to unresponsive buttons and erratic temperature... ⚠️ Difficulty Varies
What Does Error F2E3 Mean?
The KitchenAid Oven F2E3 error indicates a malfunction in the user interface or control board, leading to unresponsive buttons and erratic temperature readings. This issue may prevent the oven from operating normally until resolved. A reset of the power supply may temporarily clear the error, but persistent issues require inspection of the keypad, wiring, and control board for faults.
Common Symptoms:
- Error code F2E3 displayed on oven/range control panel
- Oven may not operate normally until error is cleared
- Buttons may be unresponsive or control panel may be malfunctioning
Possible Causes
- User interface/keypad malfunction or short (medium)
- Control board communication failure or wiring fault (medium)
How to Fix Error F2E3
DIY Fix Reset power and check for persistent error
- Turn off power to the oven at the circuit breaker or unplug the unit.
- Wait at least 60 seconds.
- Restore power and monitor the oven for at least one minute to see if F2E3 reappears.
Technician Only Inspect and repair user interface and control communication
- Disconnect power to the oven.
- Access the control panel assembly and inspect user interface/keypad for damage, contamination, or stuck keys.
- Check wiring harness connections between keypad/user interface and control board for secure connections and damage.
- Test communication signals between control board and user interface; replace the keypad or control board assembly if faulty.
- Reassemble and test oven operation after repairs.
Parts needed: Keypad/user interface assembly, Control board (Electronic Range Control), Wiring harness/connectors
- If error code reappears after reset and basic inspection
- If control board or keypad replacement is required beyond user capabilities
Next step
Choose the next step for F2E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Oven Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10705551 |
| voltage_rating | 120V AC |
Common Questions
What does F2E3 error mean on KitchenAid Oven?
F2E3 indicates a malfunction in the user interface or control board, causing erratic temperature readings.
Can I fix KitchenAid Oven F2E3 error myself?
Yes, you can reset the power to see if the error clears. If it persists, further inspection is needed.
How much does it cost to fix F2E3 error?
Repair costs for the F2E3 error range from $150 to $600, depending on parts and labor.
When should I call a technician for F2E3?
Call a technician if the error reappears after a reset or if control board/keypad replacement is needed.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!