KitchenAid Oven Error F1E3
⚡ Quick Answer: The KitchenAid Oven F1E3 error code signifies a control-related fault, often linked to communication or configuration issues within the oven control s... ✅ DIY Fixable
What Does Error F1E3 Mean?
The KitchenAid Oven F1E3 error code signifies a control-related fault, often linked to communication or configuration issues within the oven control system, especially after power-up or service. This error can cause the oven to become unresponsive or locked out, particularly following a control board replacement. Ensuring correct harness and jumper settings is crucial for proper operation.
Common Symptoms:
- Error displays immediately on power‑up
- Oven becomes non‑responsive or locked out
- Occurs after control board replacement or service
Possible Causes
- Incorrect harness/jumper configuration on the control board after servicing (high)
- Control board communication/configuration mismatch (medium)
How to Fix Error F1E3
DIY Fix Perform a power reset
- Turn off power to the oven at the circuit breaker or unplug it.
- Wait 60 seconds.
- Restore power and observe if the error clears.
Technician Only Verify harness/jumper and perform end‑of‑service test
- Disconnect power and inspect the P1 harness connection and configuration jumper on the control board.
- Ensure jumper matches oven model specifications.
- Reconnect power and perform the manufacturer’s End of Service Test sequence to program the control properly.
Parts needed: Control board harness/jumper assembly
Technician Only Inspect and reprogram or replace control board if needed
- Check control board communication integrity and verify correct programming.
- If control fails programming or shows hardware faults, replace with correct OEM control board.
- Verify all connectors and re‑test oven operation.
Parts needed: Control board (electronic oven control)
- If the error persists after resetting power and proper configuration checks
- If you are not trained to perform control board programming and jumper verification
Next step
Choose the next step for F1E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10709976 |
| voltage_rating | 120V AC |
Common Questions
What does F1E3 error mean on KitchenAid Oven?
F1E3 indicates a control fault linked to configuration or communication issues in the oven.
Can I fix KitchenAid Oven F1E3 error myself?
Yes, you can perform a power reset by turning off the oven at the circuit breaker for 60 seconds.
How much does it cost to fix F1E3 error?
Repair costs range from $0–$50 for harness/jumper parts if needed.
When should I call a technician for F1E3?
Call a technician if the error persists after resetting power or if you're unsure about control board programming.
Sources & References
- F1 E3 Wall Oven Product Help (official)
- Service Pointer for F1 E3 after servicing (official)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!