KitchenAid Dryer Error PF
⚡ Quick Answer: The KitchenAid Dryer PF error code signals a power failure, typically caused by a loss of electrical power during operation. This may be indicated by ... ✅ DIY Fixable
What Does Error PF Mean?
The KitchenAid Dryer PF error code signals a power failure, typically caused by a loss of electrical power during operation. This may be indicated by the control panel flashing or the dryer stopping mid-cycle. The dryer can often resume after the power is restored, but persistent PF messages may suggest underlying electrical issues.
Common Symptoms:
- PF displayed on control panel after power interruption
- Dryer stops mid‑cycle when PF appears
- Dryer may resume cycle after clearing PF
Possible Causes
- Actual electrical power interruption to the dryer (high)
How to Fix Error PF
DIY Fix Clear and reset PF error
- Press and hold Start to continue drying cycle after power restored
- Or press Pause/Cancel/Off to clear the PF code
- Unplug dryer or switch off breaker for at least 1 minute to reset control board memory
DIY Fix Check household power and connections
- Confirm no household power outage or tripped circuit breaker
- Check that dryer power cord is fully inserted and not damaged
- Avoid using overloaded circuits that may cause voltage drop
Technician Only Inspect wiring and electrical components
- Disconnect power and inspect dryer’s internal wiring harness and connections for looseness or damage
- Test outlet voltage and circuit integrity
- Verify control board operation and replace if PF persists after resets and proper power supply
Parts needed: multimeter for voltage testing, control board (if defective), wiring harness or connectors
- PF reappears after clearing and resetting power
- Signs of internal wiring damage or smell of burning
- Unstable power supply unable to be resolved at outlet
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does PF error mean on KitchenAid Dryer?
The PF error indicates a power failure, shown by the dryer stopping mid-cycle and displaying PF on the control panel.
Can I fix KitchenAid Dryer PF error myself?
Yes, you can reset the PF error by pressing Start, or by unplugging the dryer for a minute to reset the control board.
How much does it cost to fix PF error?
Repair costs range from $50 to $400, depending on parts and labor needed.
When should I call a technician for PF?
Call a technician if the PF error reappears after resetting, or if there are signs of wiring damage or unstable power supply.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!