KitchenAid Dishwasher Error 6-7
⚡ Quick Answer: The KitchenAid Dishwasher error code 6-7 typically indicates an issue with the drain pump, often accompanied by unusual noises during operation. If th... ✅ DIY Fixable
What Does Error 6-7 Mean?
The KitchenAid Dishwasher error code 6-7 typically indicates an issue with the drain pump, often accompanied by unusual noises during operation. If the Clean light is blinking seven times, this may suggest a potential heating-related problem. To troubleshoot, try resetting the dishwasher by disconnecting power for at least one minute and observing if the error persists.
Possible Causes
- Drain Pump Assembly
- Wiring Issues
- Control Board Failure
How to Fix Error 6-7
DIY Fix Check for 7‑blink heating pattern and basic resets
- Note whether the Clean light on your dishwasher is blinking seven times consistently on startup or end of cycle.
- Try resetting the dishwasher by disconnecting power (unplug or breaker off) for at least one minute, then restore power and observe if the pattern continues.
Technician Only Diagnostic test for heating circuit and control
- Put the dishwasher into diagnostic mode (per your specific model) to determine whether the control board is reporting a formal 6‑7 fault internally.
- Using a multimeter, check continuity and operation of the heating element and associated thermostat/thermistor circuits if a heating fault is suspected.
- Inspect control board for error logs and verify wiring harnesses for damage or loose connections in the heating circuit area.
Parts needed: multimeter, control board diagnostic access, heating element and thermostat/thermistor test harness
- If the error pattern persists after reset and basic observation, especially if water is not heating or the dishwasher will not complete cycles, contact qualified appliance service.
- Do not attempt internal electrical repairs without proper training.
Next step
Choose the next step for 6-7
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 6-7 error mean on KitchenAid Dishwasher?
Error 6-7 indicates a malfunction in the drain pump, potentially linked to heating issues.
Can I fix KitchenAid Dishwasher 6-7 error myself?
Yes, try resetting the dishwasher by disconnecting power for a minute and check for blinking patterns.
How much does it cost to fix 6-7 error?
Estimated repair costs range from $100 to $300 for labor, with parts extra.
When should I call a technician for 6-7?
If the error persists after a reset or if the dishwasher won't heat or complete cycles, contact a technician.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!