KitchenAid Dishwasher Error 6-2

⚡ Quick Answer: The KitchenAid dishwasher error 6-2 indicates a malfunction with the water inlet valve, preventing proper water fill. This may cause the dishwasher to... ✅ DIY Fixable

What Does Error 6-2 Mean?

The KitchenAid dishwasher error 6-2 indicates a malfunction with the water inlet valve, preventing proper water fill. This may cause the dishwasher to stop during the fill cycle and display the error code. Symptoms include unusual noises and repeated cycles without water intake. Checking the water supply and resetting the appliance can help, but persistent issues may require professional repair.

Common Symptoms:

  • Dishwasher stops during fill or won’t fill with water properly
  • Error 6-2 displayed on control panel
  • Possible repeated cycles without water intake

Possible Causes

  • Faulty or failing water inlet valve (medium)
  • Loose or damaged wiring to the water inlet valve (medium)

How to Fix Error 6-2

DIY Fix Check basic water supply and reset

  1. Ensure the water supply valve to the dishwasher is fully open.
  2. Verify that the water line isn’t kinked or blocked.
  3. Disconnect power to the dishwasher for 5 minutes and then restore it to clear the error code.

Technician Only Test and replace water inlet valve

  1. Disconnect the dishwasher from power and access the water inlet valve assembly.
  2. Inspect the valve wiring harness for loose or damaged connections.
  3. Use a multimeter to measure the resistance of the water inlet valve coil (approximately ~1400 ohms expected).
  4. Replace the water inlet valve if resistance is out of range or valve is faulty.

Parts needed: Water inlet valve, Multimeter for testing, Replacement wiring harness if damaged

🛑 When to Call a Pro:
  • If the error persists after checking water supply and basic reset
  • If multimeter testing shows proper valve resistance but error continues
  • If you find any electrical shorts or burned wires during inspection

Next step

Choose the next step for 6-2

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Water Inlet Valve

Controls the flow of hot and cold water into the appliance.

Typical part-only price
$25 - $60
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does 6-2 error mean on KitchenAid dishwasher?

Error 6-2 indicates a malfunction in the water inlet valve, causing fill issues.

Can I fix KitchenAid dishwasher 6-2 error myself?

Yes, check the water supply and reset the dishwasher to see if the error clears.

How much does it cost to fix 6-2 error?

Repair costs range from $50 to $150 for parts and labor.

When should I call a technician for 6-2?

Call a technician if the error persists after basic checks or if wiring issues are found.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!