Kitchenaid Dishwasher Error 2-2
⚡ Quick Answer: The KitchenAid dishwasher error code 2-2 indicates a communication issue between the user interface control panel and the electronic control board. Us... ✅ DIY Fixable
What Does Error 2-2 Mean?
The KitchenAid dishwasher error code 2-2 indicates a communication issue between the user interface control panel and the electronic control board. Users may notice the error displayed on the control panel, along with unresponsive buttons or the dishwasher failing to start. This problem often stems from faulty connections, a defective control panel, or a malfunctioning control board.
Common Symptoms:
- Dishwasher displays 2-2 or F2E2 on the control panel
- Dishwasher does not start or respond normally
- Control panel buttons may be unresponsive or cause immediate error display
Possible Causes
- Faulty or loose connection between user interface control and control board (medium)
- Defective user interface control panel (medium)
- Electronic control board malfunction (medium)
How to Fix Error 2-2
DIY Fix Basic checks and reset
- Turn the dishwasher off and disconnect power by unplugging or switching off the circuit breaker for at least 30 seconds.
- Restore power and see if the 2-2 error clears.
- Check that the control panel feels securely seated and that no buttons are visibly stuck or damaged.
Technician Only Inspect and repair communication link
- Disconnect power to the dishwasher.
- Remove access panels to reach the control board and user interface control board.
- Inspect wiring harness and connectors between the user interface and control board for loose connections, damage, or corrosion.
- Secure or replace any damaged wires or connectors.
- Test continuity between the user interface board and electronic control board with a multimeter.
- Reassemble and power up to test if error persists.
Parts needed: User interface control panel, Electronic control board, Wiring harness/connectors
- If after basic power reset and visual checks the 2-2 error persists.
- If wiring appears damaged or difficult to access.
- If replacing the user interface or control board is needed but expertise/tools are lacking.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | W10878945 |
| voltage_rating | 120V AC |
Common Questions
What does 2-2 error mean on KitchenAid dishwasher?
The 2-2 error indicates a communication issue between the control panel and the electronic control board.
Can I fix KitchenAid dishwasher 2-2 error myself?
Yes, try resetting the dishwasher by turning it off and disconnecting power for 30 seconds.
How much does it cost to fix 2-2 error?
Repair costs typically range from $50 to $250+, depending on parts and labor.
When should I call a technician for 2-2?
Call a technician if the error persists after a reset or if wiring issues are present.
Sources & References
- KitchenAid Dishwasher Error Codes: What Do They Mean? (community)
- KitchenAid Product Help – F2E2 Error Code (official)
Data last verified: 2026-03-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!