KitchenAid Dishwasher Error 1-1
⚡ Quick Answer: The KitchenAid dishwasher error code 1-1 indicates a problem with the control system, often linked to a stuck relay on the electronic control board. T... ✅ DIY Fixable
What Does Error 1-1 Mean?
The KitchenAid dishwasher error code 1-1 indicates a problem with the control system, often linked to a stuck relay on the electronic control board. This error may prevent the dishwasher from starting or progressing through its cycles, and users might notice the error code displayed on the control panel. If the error persists after a power reset, further inspection of the control board and wiring is necessary.
Common Symptoms:
- Dishwasher displays 1-1 or F1E1 on control panel
- Dishwasher may not start or may fail to proceed with normal cycles
- Error persists after basic reset attempts
Possible Causes
- Stuck relay or control fault on the electronic control board (medium)
How to Fix Error 1-1
DIY Fix Power reset the dishwasher
- Disconnect power to the dishwasher by unplugging or turning off the circuit breaker.
- Wait 5 minutes to allow residual charge to dissipate.
- Restore power and check if the error clears.
Technician Only Inspect and repair/replace control board and related wiring
- Verify power to the unit is off.
- Remove access panels to reach the electronic control board.
- Inspect wiring harnesses and connections for damage or loose contacts.
- Test the relay circuits on the control board per the model’s tech sheet.
- Replace the control board if a relay or board fault is confirmed.
Parts needed: Electronic control board, Control board wiring harness
- If the error persists after a proper power reset and basic visual inspection
- If there is evidence of electrical damage (burnt wiring/board)
- If you are not comfortable working with internal electronics
Next step
Choose the next step for 1-1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does 1-1 error mean on KitchenAid dishwasher?
It indicates a control system fault, usually a stuck relay on the electronic control board.
Can I fix KitchenAid dishwasher 1-1 error myself?
Yes, you can try a power reset by disconnecting power for 5 minutes.
How much does it cost to fix 1-1 error?
Estimated repair costs range from $150 to $400, depending on technician rates and parts.
When should I call a technician for 1-1?
Call if the error persists after a reset, if you see electrical damage, or if you're uncomfortable with electronics.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!