Kenmore Refrigerator Error ER-HS

⚡ Quick Answer: The Kenmore refrigerator error code ER-HS indicates a high side temperature issue related to the humidity sensor. This error may lead to inconsistent ... ⚠️ Difficulty Varies

What Does Error ER-HS Mean?

The Kenmore refrigerator error code ER-HS indicates a high side temperature issue related to the humidity sensor. This error may lead to inconsistent humidity levels and could cause the refrigerator to operate noisily or fail to maintain proper cooling. Possible causes include a defective humidity sensor or wiring issues associated with the sensor.

Common Symptoms:

  • Error code ER‑HS displayed on refrigerator control panel.
  • Potential issues maintaining consistent humidity levels inside the refrigerator.

Possible Causes

  • Defective humidity sensor (medium)
  • Wiring issues (short or open circuit) related to the humidity sensor (medium)

How to Fix Error ER-HS

DIY Fix Perform basic visual inspection

  1. Disconnect the refrigerator from power (unplug or switch off breaker).
  2. Inspect the humidity sensor location for visible debris, moisture, or damage.
  3. Check and ensure sensor wiring connectors are firmly seated.

Technician Only Diagnostic and component replacement

  1. Disconnect power and access humidity sensor according to the service manual.
  2. Use a multimeter to measure sensor resistance/continuity per specification.
  3. Inspect wiring harness for shorts, opens, or corrosion.
  4. Replace the humidity sensor if readings are out of spec or connectors are damaged.
  5. If the sensor and wiring are good, test the control board sensor circuit and replace as needed.

Parts needed: Humidity sensor, Wiring harness/connector, Control board (if sensor circuit failure)

🛑 When to Call a Pro:
  • If the error persists after basic visual inspection and power cycling.
  • If you are not comfortable working with electrical components inside the refrigerator.
  • If diagnostic testing of the sensor and wiring is inconclusive or indicates control board involvement.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 ohms
part_number W10664825
voltage_rating 120V AC

Common Questions

What does ER-HS error mean on Kenmore refrigerator?

ER-HS indicates a high side temperature issue linked to the humidity sensor, affecting cooling.

Can I fix Kenmore refrigerator ER-HS error myself?

Yes, you can perform a visual inspection of the humidity sensor and wiring after disconnecting power.

How much does it cost to fix ER-HS error?

Repair costs vary; humidity sensor parts range from $30 to $150, plus technician labor.

When should I call a technician for ER-HS?

Call a technician if the error persists after your inspection or if you're uncomfortable with electrical components.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!