Kelvinator Refrigerator Error E1
⚡ Quick Answer: The Kelvinator refrigerator E1 error code signals a potential failure in the temperature sensor, which can lead to inaccurate temperature readings and... ✅ DIY Fixable
What Does Error E1 Mean?
The Kelvinator refrigerator E1 error code signals a potential failure in the temperature sensor, which can lead to inaccurate temperature readings and inadequate cooling performance. This issue may cause the refrigerator to stop functioning properly. To address this, users can attempt a simple reset by unplugging the appliance for 5-10 minutes. If the error persists, further inspection of the temperature sensor and wiring may be necessary.
Common Symptoms:
- Error E1 displayed on control panel
- Possible temperature regulation issues (based on general refrigerator community information)
- Refrigerator may stop normal cooling function
Possible Causes
- Temperature Sensor
How to Fix Error E1
DIY Fix Check for simple issues & reset
- Unplug the refrigerator from the power outlet and leave it disconnected for 5–10 minutes.
- Plug the refrigerator back in to see if the E1 code clears.
- Check that the doors are fully closed and seals are intact.
Technician Only Inspect temperature sensor / thermistor and wiring
- Access the refrigerator’s internal temperature sensor (thermistor).
- Check for loose, damaged, or disconnected wiring between the sensor and the control board.
- Test the thermistor with a multimeter to verify correct resistance values (manufacturer spec required).
- Replace sensor or repair wiring as needed.
Parts needed: temperature sensor / thermistor, wiring harness
- If error persists after reset.
- If internal components appear burnt, damaged, or wiring is frayed.
- If the issue recurs after attempted sensor checks.
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kOhms |
| part_number | KELV-TS-001 |
| voltage_rating | 120V AC |
Common Questions
What does E1 error mean on Kelvinator refrigerator?
E1 indicates a failure in the temperature sensor, leading to cooling issues.
Can I fix Kelvinator refrigerator E1 error myself?
Yes, try unplugging the refrigerator for 5-10 minutes to reset.
How much does it cost to fix E1 error?
Repair costs range from ¥3,000 to ¥10,000+ for parts, plus labor.
When should I call a technician for E1?
Call if the error persists after a reset or if visible damage is present.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!